Floor Dryer Manufacturer & Supplier
Choose a floor dryer for your cleaning team's drying routine. CLEVO manufactures and supplies floor dryers for suitable carpets and hard floors after wet cleaning. These air movers circulate air across damp surfaces to support evaporation after excess water has been recovered. Compare 13 models, including three-speed controls, timer-equipped models and CB-900R with a heated-air mode, then request bulk pricing for your facility fleet or distributor range.
Choose a floor dryer for your site
Choose the controls and operating mode your team needs, then plan where each air mover will stand. Drying depends on the remaining moisture and the room conditions as well as the airflow across the surface.
Comparing other cleaning equipment? Return to all commercial cleaning equipment.
135 W and 200 W three-speed models
Choose CB-135C for straightforward air movement, CB-135B when the listed negative-ion feature is part of your specification, or CB-135S for a timer and electronic display. CB-200 gives you another three-speed model with a 200 W rating and blue/red colour options.
View models and specifications →The CB-350 model group
CB-350 and CB-350N use different exterior designs with the same 350 W, 220 V / 50 Hz, airflow and colour specifications. If a timer is required, include it in the quotation for confirmation. Keep the exact model in your order so the supplied unit is recorded clearly.
View models and specifications →CB-900 models for different operating requirements
Compare the CB-900 family by its documented features: CB-900E has a folding design, CB-900N has a timer and an optional pull handle, and CB-900R provides ambient and heated air. The remaining CB-900 models provide three-speed air movement for the drying routine.
View models and specifications →Compare the floor dryers on your shortlist
Choose two to four of the 13 models to compare their packing reference, electrical ratings, airflow and documented controls in the same rows. Full specifications and model notes remain available below.
Choose a starting group
Select 2–4 models. Each model name in the table links to its complete specifications.
| Specification |  CB-135C |
CB-135S |
CB-900N |
 CB-900R |
|---|---|---|---|---|
| Shipping reference | ||||
| Packing dimensions | 330 × 290 × 260 mm | 330 × 290 × 260 mm | 530 × 420 × 600 mm | 530 × 420 × 600 mm |
| Electrical and airflow | ||||
| Standard / ambient-air power | 135 W | 135 W | 1000 W | 1000 W ambient air |
| Heated-air power | --- | --- | --- | 3000 W |
| Airflow (high / medium / low) | 13 / 12 / 11.5 m³/min | 13 / 12 / 11.5 m³/min | 160 / 130 / 110 m³/min | 160 / 130 / 110 m³/min |
| Order configuration | ||||
| Colour options | --- | --- | Blue / grey | Blue |
| Listed functions / options | Air blowing | Air blowing; negative-ion function; timer; electronic display | Timer; optional pull handle | Ambient-air and heated-air operation |
Floor dryer models and complete specifications
Every model has its own complete table. Airflow values are presented in high / medium / low order, while power is an electrical rating rather than a drying-time estimate. All dimensions shown are packing dimensions. Models that share group specifications remain separate order references.
No matching models. Try another name.
135 W and 200 W floor dryers
Four three-speed air movers for directing air across cleaned surfaces. Compare the basic blowing function with the extra controls on CB-135S, then select the model quantities for your cleaning teams or product range.
CB-135B
135 W three-speed air mover with a negative-ion function
CB-135B
For post-cleaning airflow, the CB-135B floor dryer directs air across suitable damp flooring after your team has recovered excess water. At high, medium and low speeds, it lists 13, 12 and 11.5 m³/min, with a 135 W rating on a 220 V, 50 Hz supply. Choose it when your equipment specification includes the listed negative-ion function alongside air blowing. Your operator can adjust the speed and placement to suit the treated surface and the surrounding work area.
| Specification | CB-135B |
|---|---|
| Packing dimensions | 330 × 290 × 260 mm |
| Voltage | 220 V |
| Frequency | 50 Hz |
| Power | 135 W |
| Airflow (high / medium / low) | 13 / 12 / 11.5 m³/min |
| Speed settings | High / medium / low |
| Catalogue-listed functions | Air blowing; negative-ion function |
Use CB-135B for air movement with its listed negative-ion function; for purification or disinfection, use a separately approved process. Use the packing dimensions for shipping and storage planning.
CB-135C
135 W air blowing with three speed settings
CB-135C
For a straightforward three-speed drying routine, choose the CB-135C floor dryer. It has the same listed 13 / 12 / 11.5 m³/min airflow figures and 135 W rating as CB-135B, with air blowing as its specified function. After water recovery, use it to move air over suitable carpet or hard-floor sections while the area remains protected. Its 220 V, 50 Hz supply belongs in your site-power plan and purchasing specification.
| Specification | CB-135C |
|---|---|
| Packing dimensions | 330 × 290 × 260 mm |
| Voltage | 220 V |
| Frequency | 50 Hz |
| Power | 135 W |
| Airflow (high / medium / low) | 13 / 12 / 11.5 m³/min |
| Speed settings | High / medium / low |
| Catalogue-listed functions | Air blowing |
CB-135C is specified for air blowing. Use the packing dimensions for shipping and storage planning; request operating dimensions when planning the working area.
CB-135S
Three-speed air movement with timer and electronic display
CB-135S
With a timer and electronic display, the CB-135S floor dryer adds these controls to the 135 W three-speed format. It also lists air blowing and a negative-ion function, with the same airflow figures as CB-135B and CB-135C. Choose this model when your team wants the stated timing and display controls for its drying routine. Even when the timer is in use, regular checks of the machine and treated material remain part of the job.
| Specification | CB-135S |
|---|---|
| Packing dimensions | 330 × 290 × 260 mm |
| Voltage | 220 V |
| Frequency | 50 Hz |
| Power | 135 W |
| Airflow (high / medium / low) | 13 / 12 / 11.5 m³/min |
| Speed settings | High / medium / low |
| Catalogue-listed functions | Air blowing; negative-ion function; timer; electronic display |
CB-135S includes the listed timer, electronic display and negative-ion function. Use it for air movement; for purification or disinfection, use a separately approved process.
CB-200
200 W three-speed model with blue/red colour options
CB-200
At high, medium and low speeds, the CB-200 floor dryer lists airflow of 15.3, 14.1 and 11.5 m³/min. Its 200 W rating and blue/red colour options give your distributor range a distinct specification alongside the CB-135 models. After liquid recovery, your cleaning team can direct its air across a suitable damp surface. Position it to serve the treated section while keeping the inlet, outlet and pedestrian route clear.
| Specification | CB-200 |
|---|---|
| Packing dimensions | 330 × 300 × 375 mm |
| Voltage | 220 V |
| Frequency | 50 Hz |
| Power | 200 W |
| Airflow (high / medium / low) | 15.3 / 14.1 / 11.5 m³/min |
| Speed settings | High / medium / low |
| Colour options | Blue / red |
Use the 330 × 300 × 375 mm figure for packing and shipping planning. Choose another listed model when the order requires a timer, heated air or a negative-ion function.
CB-350 and CB-350N air movers
This model group has a shared three-speed specification and a timer illustration. Compare its documented settings and packing information as a group, with each order model retained separately below.
CB-350
Different exterior design, shared specifications with CB-350N
CB-350
The CB-350 floor dryer has a different exterior design from CB-350N but shares the same specifications. It provides three-speed airflow for drying support after cleaning, with high, medium and low figures of 12.5, 11.5 and 10.5 m³/min, a 350 W rating and blue/red colour options. As work moves between treated sections, your team can adjust the airflow with the speed settings. For a bulk order, keep CB-350 identified on the machine line so the supplied unit and service records carry the same model reference.
| Specification | CB-350 |
|---|---|
| Packing dimensions | 400 × 370 × 326 mm |
| Voltage | 220 V |
| Frequency | 50 Hz |
| Power | 350 W |
| Airflow (high / medium / low) | 12.5 / 11.5 / 10.5 m³/min |
| Speed settings | High / medium / low |
| Colour options | Blue / red |
| Shared-group illustrated feature | Timer |
CB-350 and CB-350N have different exterior designs and share the same specifications and blue/red colour choices. Keep the exact order model, colour and any timer requirement on the quotation.
CB-350N
Different exterior design, shared specifications with CB-350
CB-350N
The CB-350N floor dryer has a different exterior design from CB-350 but shares the same specifications. Its specification is 350 W, 220 V and 50 Hz, with three speed settings for directing air over suitable damp flooring and blue/red colour options. Keep CB-350N separate in your quotation and service list, and state any timer requirement for confirmation.
| Specification | CB-350N |
|---|---|
| Packing dimensions | 400 × 370 × 326 mm |
| Voltage | 220 V |
| Frequency | 50 Hz |
| Power | 350 W |
| Airflow (high / medium / low) | 12.5 / 11.5 / 10.5 m³/min |
| Speed settings | High / medium / low |
| Colour options | Blue / red |
| Shared-group illustrated feature | Timer |
Use CB-350N as the order and service reference, with the required colour and any timer requirement shown on the quotation.
CB-900 series floor dryers
Seven models cover three-speed air movement and specific folding, timing or heating requirements. Use the documented features to choose the order configuration, with ambient and heated modes kept together under CB-900R.
CB-900
1000 W three-speed air mover for the drying stage
CB-900
For three-speed air movement, the CB-900 floor dryer lists a 1000 W rating on a 220 V, 50 Hz supply. Include it in your cleaning-equipment order for the airflow stage after carpet extraction or hard-floor water recovery. For the order configuration, blue and red are listed colour options. Its packing dimensions are 580 × 410 × 610 mm, giving your purchasing team a shipping reference distinct from the packing figures listed for CB-900B.
| Specification | CB-900 |
|---|---|
| Packing dimensions | 580 × 410 × 610 mm |
| Voltage | 220 V |
| Frequency | 50 Hz |
| Power | 1000 W |
| Airflow (high / medium / low) | 160 / 130 / 110 m³/min |
| Speed settings | High / medium / low |
| Colour options | Blue / red |
Read the airflow figures in high / medium / low order. Use the dimensions for packing and shipping planning.
CB-900B
Three-speed 1000 W model with blue/red options
CB-900B
With high, medium and low settings, the CB-900B floor dryer directs air across the area being dried. It lists 1000 W, a 220 V / 50 Hz supply and blue/red colour options. Its 530 × 420 × 600 mm packing size differs from CB-900, which matters when preparing a shipment or distributor stock plan. In operation, place the unit on a stable, dry surface and inspect the treated area regularly.
| Specification | CB-900B |
|---|---|
| Packing dimensions | 530 × 420 × 600 mm |
| Voltage | 220 V |
| Frequency | 50 Hz |
| Power | 1000 W |
| Airflow (high / medium / low) | 160 / 130 / 110 m³/min |
| Speed settings | High / medium / low |
| Colour options | Blue / red |
Read the airflow figures in high / medium / low order. Use the listed dimensions for packing and shipping planning.
CB-900C
1000 W air movement with three selectable speeds
CB-900C
The CB-900C floor dryer moves air over suitable cleaned surfaces to support the drying stage. As the operator works around the treated section and nearby objects, the three speed settings allow airflow adjustment. This model lists a 1000 W rating, a 220 V / 50 Hz supply and blue/red colour options. Keep CB-900C on the order and service records when buying several units, so receiving staff can match each machine to the quoted model.
| Specification | CB-900C |
|---|---|
| Packing dimensions | 530 × 420 × 600 mm |
| Voltage | 220 V |
| Frequency | 50 Hz |
| Power | 1000 W |
| Airflow (high / medium / low) | 160 / 130 / 110 m³/min |
| Speed settings | High / medium / low |
| Colour options | Blue / red |
CB-900C shares the listed specification figures of CB-900D. Order replacement parts by the exact model number, and read the airflow figures in high / medium / low order.
CB-900D
Three-speed air blowing for post-cleaning work
CB-900D
A 1000 W rating, three speed settings and blue/red colour options define the CB-900D floor dryer. After excess water has been removed, it serves the airflow part of your floor-drying routine. The model lists a 220 V, 50 Hz supply and a 530 × 420 × 600 mm packing size. For business orders, these figures help record the electrical and shipping requirements while your cleaning team plans placement, ventilation and inspections at the site.
| Specification | CB-900D |
|---|---|
| Packing dimensions | 530 × 420 × 600 mm |
| Voltage | 220 V |
| Frequency | 50 Hz |
| Power | 1000 W |
| Airflow (high / medium / low) | 160 / 130 / 110 m³/min |
| Speed settings | High / medium / low |
| Colour options | Blue / red |
Use CB-900D as the order reference. Read the airflow figures in high / medium / low order, and use the dimensions for packing and shipping planning.
CB-900E
Three-speed model with a folding design
CB-900E
The CB-900E floor dryer adds a folding design to the 1000 W three-speed format. Choose this model when that design is part of the handling and storage requirements for your equipment order. It lists blue/red colour options and a 220 V, 50 Hz supply. During drying work, direct the airflow across the suitable treated surface and leave space around the air openings, with the machine standing on a stable, dry surface.
| Specification | CB-900E |
|---|---|
| Packing dimensions | 530 × 420 × 600 mm |
| Voltage | 220 V |
| Frequency | 50 Hz |
| Power | 1000 W |
| Airflow (high / medium / low) | 160 / 130 / 110 m³/min |
| Speed settings | High / medium / low |
| Colour options | Blue / red |
| Design note | Foldable design (catalogue wording) |
The folding design is model-specific. Include CB-900E and the required handling arrangement in the order; dimensions describe packing.
CB-900N
Timer-equipped air mover with an optional pull handle
CB-900N
With its timer and three speed settings, the CB-900N floor dryer has a 1000 W rating. A pull-handle configuration is listed as an option, so your order can identify whether that handling feature is required. For the finish, choose from the stated blue and grey options. This model suits a purchasing brief that includes timing controls as well as airflow adjustment; your operating routine still includes regular checks of the machine, cable and material being dried.
| Specification | CB-900N |
|---|---|
| Packing dimensions | 530 × 420 × 600 mm |
| Voltage | 220 V |
| Frequency | 50 Hz |
| Power | 1000 W |
| Airflow (high / medium / low) | 160 / 130 / 110 m³/min |
| Speed settings | High / medium / low |
| Colour options | Blue / grey |
| Configuration notes | Timer; optional pull-handle configuration |
The pull handle is optional, so include it separately in the order requirement. Blue and grey are the listed colour options.
CB-900R
Ambient-air and heated-air modes in one machine
CB-900R
For ambient-air and heated-air operation in one machine, the CB-900R floor dryer has respective power ratings of 1000 W and 3000 W. It retains high, medium and low speed settings and is listed in blue. Choose this model when your drying process calls for heated airflow and the treated material tolerates it. Because heated mode has a higher electrical requirement, include it in your site-power plan, together with the specified clearances and regular material inspections.
| Specification | CB-900R |
|---|---|
| Packing dimensions | 530 × 420 × 600 mm |
| Voltage | 220 V |
| Frequency | 50 Hz |
| Cold-air power | 1000 W |
| Heated-air power | 3000 W |
| Airflow (high / medium / low) | 160 / 130 / 110 m³/min |
| Speed settings | High / medium / low |
| Colour options | Blue |
The 1000 W ambient-air and 3000 W heated-air ratings belong to the same CB-900R. Its ambient-air mode circulates unheated room air.
The differences that affect your choice
The useful differences are the controls, operating mode and order configuration. Select them around how your team will place, inspect and move the equipment during the drying stage.
Basic air movement or additional controls
CB-135C lists air blowing, while CB-135B also lists a negative-ion function. CB-135S adds a timer and electronic display. All three share the 135 W rating and listed airflow figures, so controls and documented functions are the direct comparison.
Timers within the range
CB-135S and CB-900N explicitly list timers. For CB-350 and CB-350N, include the timer requirement in the quotation for confirmation. Even when a timer is used, continue the inspection schedule for the machine and damp material.
Handling features on CB-900E and CB-900N
CB-900E is described as foldable. CB-900N lists an optional pull-handle configuration, as well as a timer. These are separate documented features, so specify the exact model and requested handle configuration in the order.
Ambient air or heated airflow
CB-900R provides 1000 W ambient-air and 3000 W heated-air modes. Use heated mode only with compatible materials and a suitable electrical circuit.
Plan shipping from the packing figures
CB-900 lists 580 × 410 × 610 mm packing dimensions. CB-900B/C/D/E/N/R list 530 × 420 × 600 mm. Use those figures for the purchasing and shipping record; an operating footprint or storage arrangement needs the actual machine dimensions.
For the cleaning stage before airflow-assisted drying, see our carpet shampoo machines. For liquid pickup on suitable surfaces, compare our wet and dry vacuums.
Add airflow after removing excess water
A floor dryer supports evaporation by moving air across the damp surface. A wet vacuum or extractor removes recoverable liquid first; ventilation or separate dehumidification manages moisture in the surrounding air when needed. Use the sequence below as a general workflow alongside the instructions supplied with your model.
Fan and air path
The fan moves air across the damp surface and replaces moisture-laden air close to it. To keep the air path working as intended, leave the inlet and outlet clear. Position the flow away from loose dust and lightweight objects.
Speed and timing controls
All thirteen models list high, medium and low settings. CB-135S and CB-900N include listed timers; for CB-350 or CB-350N, confirm the timer requirement in the quotation. CB-135S also has an electronic display, and each unit's instructions define its control functions.
Handling and housing
The housing and guards keep the rotating components enclosed. CB-900E's folding design and CB-900N's optional pull handle are model-specific handling details. Before repositioning a unit, switch off, unplug and wait for rotation to stop.
CB-900R heated-air system
Heated mode supplies warmed airflow for materials that tolerate it. Its 3000 W rating requires a suitable power arrangement, clear air openings and the prescribed separation from surrounding materials. Follow the machine's shutdown and cooling procedure.
Your working sequence
- First, recover standing or excess water with suitable separate equipment. Check the treated material's drying requirements and protect the area from pedestrian access.
- Next, place the floor dryer on a stable, dry surface with clear inlet and outlet openings. Inspect the cable and power supply, and route the lead outside walkways and wet areas.
- Direct air across the treated section and choose a suitable speed. Use a fitted timer as instructed. Before CB-900R heated operation, confirm material heat tolerance, circuit capacity and required clearances.
- During operation, inspect the machine and material regularly. As the drying pattern changes, adjust placement or ventilation, keeping airflow away from loose dust, light objects and vulnerable equipment.
- After use, switch off, follow any specified cooling procedure, unplug and wait for the fan to stop before moving. Inspect actual dryness and surface safety before reopening the area.
CB-900B airflow setup for drying tasks
The CB-900B provides three airflow settings for moving air across damp floors and carpet. Recover excess water first, then direct airflow across the area and monitor drying conditions.
Place the airflow where the task needs it
Keep the air inlet and outlet clear and place the unit securely. Drying time depends on the surface, remaining moisture and ventilation, so inspect the area before returning it to use.
View CB-900B specifications →Floor dryer care and operating limits
Regular checks support consistent airflow and safe handling between drying tasks. Follow the instructions supplied with the selected model when isolating power, cleaning or servicing the machine.
Routine care
- Switch off, unplug and wait for moving parts to stop before cleaning or inspecting the unit. Leave guards fitted and keep fingers and tools out of the openings.
- Once the machine is isolated, remove dust from the air openings and clean the housing as instructed. Keep water sprays away from the motor, electrical connections and controls.
- Before use, inspect cables and guards. If unusual vibration, a burning smell or damage appears, stop the machine. Arrange qualified repair before returning it to service.
- Check operating units regularly, including those using timers. After heated CB-900R operation, follow the required cooling procedure before moving or storing the machine.
Application limits
- Before starting airflow drying, recover standing water. Use the floor dryer only on a dry, stable surface with dry electrical connections.
- Keep air openings clear and avoid flammable vapours, hazardous dust and combustible materials in the airflow. Use only the operating positions and attachments approved for the machine.
- Test heat-sensitive coatings, adhesives and fibres before applying CB-900R heated air. Continue to monitor the machine and drying area when using a timer, and inspect the surface before reopening it to public access.
Need help identifying a service item?
Send the exact model and a photo or part reference for the cable, guard or other fitted component.
Floor dryer options and service items
List the floor dryer, its documented option and any separate equipment used before airflow drying as individual order items. Include the exact model with each option or service item so configuration and compatibility can be checked.
CB-900N pull-handle option
The pull handle is a listed optional configuration for CB-900N. Include it as a separate requirement in your quotation so the supplied handling arrangement is clear.
Electrical and housing service items
Identify the exact model and fitted part when requesting replacement cables, guards or other service components. Include that model number in the enquiry so compatibility can be checked before supply.
Equipment used before airflow drying
Recover free water with an appropriate wet vacuum or extractor before running the air mover. These machines are ordered separately from the floor dryer.
Routine care supplies and add-ons
Do not add detergent to the floor dryer. Clean the housing and grilles only by the permitted method. Before ordering ducts, add-on heaters, stacking arrangements or extra power connections, confirm that they are approved for the exact model.
Need the option and service items listed separately?
Tell us the model and intended drying task so the quotation can distinguish the machine, documented option and any separate equipment.
Prepare a clear floor dryer quotation request
Start with the drying task and model mix, then add the electrical, configuration and delivery details needed for an itemised offer.
Task and process
Describe the compatible carpet, hard floor or upholstery, the water-recovery step used first and the ventilation around the working area.
Models and quantities
List quantities by model. Include required colours, CB-900N's optional pull handle and whether CB-900R heated-air operation is part of the intended task.
Power and destination
Share the site power supply and delivery destination. Packing, minimum quantity and lead time can then be recorded with the selected models in the written quotation.
Ready to price the order?
Send the model shortlist and quantities, or describe the drying work if you want help narrowing the range.
Plan your floor dryer supply with CLEVO
CLEVO supplies floor dryers for cleaning contractors, facility teams and equipment distributors. We can help organise a model mix around three-speed air movement, timing controls or a specified heated-air process, with the selected configuration recorded for purchasing and receiving.
Match each model to the drying task
Tell us whether your team is treating compatible carpet, hard floors or upholstery after cleaning. Include the water-recovery method and the working area's ventilation so the model discussion starts with the actual process.
Set models and configurations
List quantities by model, the required colour and any documented option such as CB-900N's pull handle. For CB-900R, include whether heated operation is part of the intended task and the site's electrical requirements.
Prepare the itemised order
Share the destination and requested service items. The written quotation can keep the supplied configuration, packing, minimum quantity and lead time with the model prices for that order.
Production photographs coming soon. Contact CLEVO with the model mix and delivery requirements for your order.
Keep the selected model and supply details together
We can help organise model, configuration, service-item and delivery questions before an order and when identifying parts for a supplied machine.
Written quotation details
The offer can record each model, quantity, supplied configuration, packing, minimum quantity and lead time for that order.
Model and configuration records
To identify the supplied unit clearly, keep the exact model, colour, electrical requirement and documented option on the purchasing and receiving record.
Service-item identification
For a replacement cable, guard or other fitted component, share the model name and a photo or part reference so compatibility can be checked before supply.
Have a product or order question?
Tell us which model, configuration or service item you need to discuss.
Drying tasks across your commercial sites
Choose a floor dryer around the surface, excess-water recovery and ventilation at your site.
Surface, airflow placement and moisture checks
Plan the model and speed for the treated material, and inspect actual dryness before reopening the area.
Before you order
Answers for your model shortlist, operation and purchasing plan.
What does a floor dryer do after cleaning?
It directs moving air over the damp surface to support evaporation. Use it after recovering excess water with suitable separate equipment. Placement and speed help control the airflow across the section, while the material, remaining moisture and room conditions determine the drying progress.
Can it replace a wet vacuum or dehumidifier?
No. A wet vacuum or extractor collects liquid, an air mover circulates air over the surface, and a dehumidifier removes moisture from the air. Use these floor dryers for the airflow stage and separate equipment for liquid recovery or dehumidification.
How long will my floor or carpet take to dry?
Because starting moisture, carpet or floor construction, temperature, room humidity and ventilation all affect the result, there is no fixed drying time for the range. Check the treated material during operation and base reopening on its actual condition, not elapsed time or the machine's wattage.
Which models have a timer?
CB-135S and CB-900N include listed timers. For CB-350 or CB-350N, state the timer requirement in the quotation for confirmation. CB-135S also lists an electronic display, and all thirteen models list high, medium and low speed settings.
Can timer-equipped models be left unattended?
Even when using a timer, continue regular inspections. Check the machine, cable, air openings and treated material while it runs. Keep the area protected and follow the particular model's operating instructions throughout the drying period.
Does the negative-ion function disinfect the area?
Use the negative-ion feature on CB-135B and CB-135S only as part of their documented airflow configuration. For purification or disinfection, use a separately approved process.
Are CB-900R's cold and heated versions two different machines?
They are two modes of the same model. CB-900R uses 1000 W in ambient-air mode and 3000 W in heated-air mode. Ambient-air mode circulates unheated room air. Heated operation needs a suitable circuit and a material that tolerates the treatment.
Is CB-900N's pull handle included?
Because the handle is an optional configuration, include the requirement in the quotation request so the offer identifies the supplied arrangement. Blue and grey are the colour options listed for CB-900N.
What information is needed for a distributor or bulk quote?
Send the models and quantities, destination, electrical supply and required colours or documented options. Describe the drying task if you need help selecting the range. Ask for the supplied configuration, packing, MOQ and lead time to be stated in the written quotation for the order.
Can I combine different floor dryer models in one quotation?
Yes. List the quantities by model and include the required colours, electrical supply and any documented option. If your shortlist is not complete, describe the drying tasks and delivery destination so the quotation can organise the selected models and order details together.
Request floor dryer wholesale pricing
Get a model-based quotation for the air movers your business needs.
Send the quantities and operating requirements for your cleaning teams or distributor range, including any timer, pull-handle or heated-air requirement.
Tell us what you need to source
- Treated material and drying process
- Models, quantities and colour requirements
- Documented options and requested service items
- Electrical supply and delivery destination