Commercial Carpet Shampoo Machines Manufacturer & Supplier
Equip your cleaning team—or your distributor range—with commercial carpet shampoo machines for furnished rooms and continuous carpeted areas. CLEVO supplies six hose-and-tool extractors and three brush-equipped models, with complete specifications beside each product.
Choose the working method your team needs
Both series apply cleaning solution and recover dirty water from wet-cleanable carpet. The main difference is where the cleaning action takes place: at a separate hand tool, or underneath the machine.
Return to all commercial cleaning equipment. For fabric seating rather than carpeted floors, compare our portable upholstery cleaners.
Furnished rooms, edges and local areas
The AC series lets you move a hose-connected tool around furniture without taking the whole machine across every treatment area. It suits the stop-and-reposition work of guest rooms, offices and reception areas.
- Separate supply and recovery paths at the tool.
- Hand-guided cleaning around desks, beds and edges.
- Six models across three paired product groups.
Corridors and continuous carpeted areas
DTJ2A, HY31 and HY32 bring spraying, powered brushing and recovery onto the machine. Your operator follows the carpeted route with the cleaning assembly, making this format useful where there is room to manoeuvre.
- Onboard powered brush agitates carpet fibres.
- Separate clean-water and recovery tanks.
- Three tank arrangements and two brush widths.
Use wet extraction on carpet that permits wet cleaning. Carpet fibre, backing, adhesive and colourfastness matter as well as the machine. These models are wet extractors, not steam cleaners.
Compare the carpet shampoo machines on your shortlist
Choose two to four models to compare tank arrangements, electrical ratings, working widths and packing details. Each model links to its complete specifications.
Scroll within the table to see more details or models. The headings stay in view.
Capacity entries for the AC model families are kept separate from clean-water and recovery tanks. Compare total input power separately from individual motor ratings, and read vacuum and airflow with their stated units. A dash means no value is specified here.
Every model, with its complete specifications
Review the product, application and technical data together. Paired AC models are shown side by side; each three-in-one model has its own specification sheet.
No matching models. Try another name.
AC hose-and-tool series
6 models · 3 paired groupsAC-30CS / AC-802CS
Hose-and-tool carpet extraction
AC-30CS
Hand-guided extraction · Furniture access
AC-30CS
Use the AC-30CS to wet-clean washable carpet around desks, beds and room edges. You guide a separate extraction tool while the wheeled canister supplies cleaning solution and collects dirty water. The 250 mm large tool and 85 mm small tool give your cleaning team different working widths for open carpet and smaller treatment areas.
| Specification | AC-30CS |
|---|---|
| Capacity (AC range) | 30 / 80 L |
| Total power (AC range) | 3110 W |
| Voltage / frequency | 220 V AC / 50 Hz |
| Tank body height | 970 mm |
| Tank diameter | 440 mm |
| Accessory diameter | 40 mm |
| Large extraction tool width | 250 mm |
| Small extraction tool width | 85 mm |
| Vacuum | 250 mbar |
| Airflow | 106 L/s |
| Cooling mode | Circulating air cooling |
| Water pump (voltage / power) | 220 V AC / 110 W |
| Water pump pressure | 30 psi |
The AC-30CS / AC-802CS range has a 30 / 80 L capacity specification. Confirm the tank capacity for your chosen model in the quotation, and plan clean-solution and recoverable-wastewater volumes separately. The 970 mm value measures the tank body, not the overall machine. Confirm the electrical and pump specifications with your order.
AC-802CS
Wheeled canister · Separate cleaning wand
AC-802CS
Equip your cleaning team for carpet extraction across rooms and reception areas with the AC-802CS. Its wheeled canister supplies cleaning solution and receives wastewater through a separate hose-connected wand. You control tool movement around furniture, while the solution line and recovery hose carry liquid to and from the working area instead of requiring an onboard floor brush.
| Specification | AC-802CS |
|---|---|
| Capacity (AC range) | 30 / 80 L |
| Total power (AC range) | 3110 W |
| Voltage / frequency | 220 V AC / 50 Hz |
| Tank body height | 970 mm |
| Tank diameter | 440 mm |
| Accessory diameter | 40 mm |
| Large extraction tool width | 250 mm |
| Small extraction tool width | 85 mm |
| Vacuum | 250 mbar |
| Airflow | 106 L/s |
| Cooling mode | Circulating air cooling |
| Water pump (voltage / power) | 220 V AC / 110 W |
| Water pump pressure | 30 psi |
The AC-30CS / AC-802CS range has a 30 / 80 L capacity specification. Confirm the tank capacity for your chosen model in the quotation, and plan clean-solution and recoverable-wastewater volumes separately. The 970 mm value measures the tank body, not the overall machine. Confirm the electrical and pump specifications with your order.
AC-602CS / AC-603CS
Two- and three-motor CS series
AC-602CS
Two motors · Hose-and-tool format
AC-602CS
Choose the AC-602CS for hand-guided carpet extraction in offices, guest rooms and reception areas. Its twin-motor configuration supports wastewater recovery while you move the tool across the carpet. A 250 mm large extraction tool and an 85 mm small tool provide distinct working widths, so your product range can address both floor coverage and detail access.
| Specification | AC-602CS |
|---|---|
| Motor count | 2 motors |
| Capacity (AC range) | 60 L |
| Total power (AC range) | 2110 W |
| Voltage / frequency | 220 V AC / 50 Hz |
| Tank body height | 970 mm |
| Tank diameter | 440 mm |
| Accessory diameter | 40 mm |
| Large extraction tool width | 250 mm |
| Small extraction tool width | 85 mm |
| Vacuum | 250 mbar |
| Airflow | 106 L/s |
| Cooling mode | Circulating air cooling |
| Water pump (voltage / power) | 220 V AC / 110 W |
| Water pump pressure | 30 psi |
Plan clean-solution and recoverable-wastewater volumes separately from the 60 L tank-capacity figure. Use tank-body height separately from overall machine height. Include the exact motor configuration with the model name and confirm the electrical and pump specifications in the quotation.
AC-603CS
Three motors · Hose-and-tool format
AC-603CS
Build your CS-series selection with the three-motor AC-603CS for washable carpets in furnished commercial spaces. The operator moves a separate extraction tool, keeping solution application and recovery close to the area being treated. With 250 mm and 85 mm tool widths listed, you can plan the working tools around broad carpet sections and smaller access points.
| Specification | AC-603CS |
|---|---|
| Motor count | 3 motors |
| Capacity (AC range) | 60 L |
| Total power (AC range) | 2110 W |
| Voltage / frequency | 220 V AC / 50 Hz |
| Tank body height | 970 mm |
| Tank diameter | 440 mm |
| Accessory diameter | 40 mm |
| Large extraction tool width | 250 mm |
| Small extraction tool width | 85 mm |
| Vacuum | 250 mbar |
| Airflow | 106 L/s |
| Cooling mode | Circulating air cooling |
| Water pump (voltage / power) | 220 V AC / 110 W |
| Water pump pressure | 30 psi |
Plan clean-solution and recoverable-wastewater volumes separately from the 60 L tank-capacity figure. Use tank-body height separately from overall machine height. Include the exact motor configuration with the model name and confirm the electrical and pump specifications in the quotation.
AC-602CP / AC-603CP
Two- and three-motor CP series
AC-602CP
Two motors · White tank-body series
AC-602CP
Add a twin-motor carpet extractor to your commercial cleaning range with the AC-602CP. Its separate wand lets your operator follow the carpet around furniture while the canister handles solution delivery and wastewater recovery. The hose-and-tool arrangement keeps the cleaning action at the hand tool, giving your team control over the treatment path in furnished rooms. The CP series uses a white tank body.
| Specification | AC-602CP |
|---|---|
| Motor count | 2 motors |
| Capacity (AC range) | 60 L |
| Total power (AC range) | 2110 W |
| Voltage / frequency | 220 V AC / 50 Hz |
| Tank body height | 970 mm |
| Tank diameter | 440 mm |
| Accessory diameter | 40 mm |
| Large extraction tool width | 250 mm |
| Small extraction tool width | 85 mm |
| Vacuum | 250 mbar |
| Airflow | 106 L/s |
| Cooling mode | Circulating air cooling |
| Water pump (voltage / power) | 220 V AC / 110 W |
| Water pump pressure | 30 psi |
Plan clean-solution and recoverable-wastewater volumes separately from the 60 L tank-capacity figure. Use tank-body height separately from overall machine height. Include the exact motor configuration with the model name and confirm the electrical and pump specifications in the quotation.
AC-603CP
Three motors · White tank-body series
AC-603CP
The AC-603CP gives your customers a three-motor option for hose-and-tool carpet extraction. You direct the separate wand around furniture and along carpet edges while the canister supplies solution and collects the recovered liquid. Its 40 mm accessory connection is a useful starting point when specifying the tool and hose package for your wholesale order. The CP series uses a white tank body.
| Specification | AC-603CP |
|---|---|
| Motor count | 3 motors |
| Capacity (AC range) | 60 L |
| Total power (AC range) | 2110 W |
| Voltage / frequency | 220 V AC / 50 Hz |
| Tank body height | 970 mm |
| Tank diameter | 440 mm |
| Accessory diameter | 40 mm |
| Large extraction tool width | 250 mm |
| Small extraction tool width | 85 mm |
| Vacuum | 250 mbar |
| Airflow | 106 L/s |
| Cooling mode | Circulating air cooling |
| Water pump (voltage / power) | 220 V AC / 110 W |
| Water pump pressure | 30 psi |
Plan clean-solution and recoverable-wastewater volumes separately from the 60 L tank-capacity figure. Use tank-body height separately from overall machine height. Include the exact motor configuration with the model name and confirm the electrical and pump specifications in the quotation.
Three-in-one brush-equipped series
3 individual modelsDTJ2A
Spray, brush and recover
DTJ2A
Bring spraying, powered brushing and dirty-water recovery together with the DTJ2A. A 400 mm brush agitates the carpet, and a 460 mm nozzle recovers dirty liquid. Separate 25 L clean-water and 36 L recovery tanks keep the liquid paths apart, giving your team an integrated working format for continuous carpeted corridors and meeting areas.
| Specification | DTJ2A |
|---|---|
| Clean-water tank capacity | 25 L |
| Recovery tank capacity | 36 L |
| Vacuum motor power | 1000 W |
| Packing dimensions | 1000 × 545 × 1975 mm |
| Net weight | 46 kg |
| Gross weight | 65 kg |
| Voltage / frequency | 220 V AC / 50 Hz |
| Brush speed | 1500 rpm |
| Brush motor power | 180 W |
| Brush width | 400 mm |
| Vacuum | 210 mbar |
| Pressure | 30 psi |
| Recovery nozzle width | 460 mm |
| Spray motor power | 110 W |
| Colours | Blue / green |
The brush works across 400 mm and the recovery nozzle across 460 mm. Confirm the 1000 × 545 × 1975 mm packed size with your order for shipment planning, and request overall machine dimensions separately for storage and access checks.
HY31
Onboard brush with twin vacuum motors
HY31
Choose the HY31 when your carpet-cleaning range needs onboard brushing and two 1000 W vacuum motors. Its 400 mm brush and 460 mm recovery nozzle combine carpet agitation with liquid pickup as you move through continuous carpeted areas. Separate 21 L clean-water and 38 L recovery tanks distinguish its tank arrangement from the other three-in-one models.
| Specification | HY31 |
|---|---|
| Clean-water tank capacity | 21 L |
| Recovery tank capacity | 38 L |
| Vacuum motor power | 1000 W × 2 |
| Packing dimensions | 1110 × 550 × 945 mm |
| Net weight | 46.2 kg |
| Gross weight | 65 kg |
| Voltage / frequency | 220 V AC / 50 Hz |
| Brush speed | 1400 rpm |
| Brush motor power | 180 W |
| Brush width | 400 mm |
| Airflow | 335 m³/h |
| Recovery nozzle width | 460 mm |
| Vacuum | 34 kPa |
| Water pump power | 110 W |
| Water pressure | 30 psi |
| Colour | Green |
The 1000 W × 2 rating describes the vacuum motors. Confirm brush power, pump power, vacuum and pump pressure with the order. Use airflow for air-volume comparison, brush and nozzle widths for the working path, and packing dimensions for shipment planning.
HY32
Backward cleaning passes with onboard brushing
HY32
Clean continuous carpeted areas in backward passes with the HY32. Its onboard 380 mm brush agitates the carpet while a 455 mm recovery nozzle collects dirty liquid. Separate 29 L clean-water and 29 L recovery tanks support the supply and collection paths, letting your team manage spraying, brushing and recovery in one walk-behind working format.
| Specification | HY32 |
|---|---|
| Clean-water tank capacity | 29 L |
| Recovery tank capacity | 29 L |
| Vacuum motor power | 1500 W |
| Packing dimensions | 1110 × 550 × 1030 mm |
| Net weight | 55 kg |
| Gross weight | 74 kg |
| Voltage / frequency | 220 V AC / 50 Hz |
| Brush speed | 800 rpm |
| Brush motor power | 370 W |
| Brush width | 380 mm |
| Airflow | 300 m³/h |
| Recovery nozzle width | 455 mm |
| Vacuum | 24 kPa |
| Water pump power | 100 W |
| Water pressure | 30 psi |
| Colour | Green |
HY32 has separate 29 L clean-water and recovery tanks. The 300 m³/h airflow describes air volume; plan the cleaning route using the brush width, recovery-nozzle width and access space. Include the packed dimensions when planning shipment.
Which carpet shampoo machine fits your work?
Start with access and working method, then compare tank arrangement, brush width and handling weight. Use each measurement for its purpose when planning the route, liquid handling and equipment access.
Need tool access around furniture?
Choose the AC hose-and-tool series. You guide the cleaning wand around beds, desks and edges while the main unit handles supply and recovery. Match the tool, route and recovery setup to the carpet and the cleaning task.
Building a two- and three-motor range?
AC-602CS and AC-602CP list 2 motors; AC-603CS and AC-603CP list 3 motors. These paired series give your distributor range different motor configurations within the same hand-tool working method.
Want a wider onboard brush?
DTJ2A and HY31 use a 400 mm brush with a 460 mm recovery nozzle. HY32 uses a 380 mm brush and 455 mm nozzle. Brush width describes the cleaning path; nozzle width describes the pickup component.
Prioritising clean-water volume?
HY32 has a 29 L clean-water tank, compared with 25 L for DTJ2A and 21 L for HY31. HY32 provides the largest clean-water tank of these three. Plan refilling around the carpet, liquid application and working route.
Planning wastewater handling?
HY31 lists 38 L recovery storage, DTJ2A 36 L and HY32 29 L. Plan access to an emptying point around the recovery tank as well as the clean-water tank; the two figures describe different jobs.
Moving machines between floors?
Net weights are DTJ2A 46 kg, HY31 46.2 kg and HY32 55 kg. These figures help your team plan transport, lifts and storage. Add the loaded liquid separately; net weight is not a full-tank handling weight.
Understand what each part does for you
Solution delivery, mechanical contact and dirty-water recovery have different roles. Understanding these parts helps your team use the machine consistently and identify what needs cleaning after work.
Solution line & spray system
Carry cleaning solution to the treatment area. Controlled application wets the carpet for extraction without making extra liquid a substitute for careful cleaning.
Hand tool or powered brush
The AC wand follows your operator’s hand movements. The three-in-one models add an onboard brush that agitates fibres while the machine moves through the working pass.
Recovery head & liquid path
Collect dirty liquid and carry it back to the machine. Keeping the pickup opening, hoses and serviceable filters clear supports consistent recovery.
AC series: hand-guided extraction
- Pre-vacuum loose dry dirt with a suitable dry vacuum and test the carpet’s suitability for wet cleaning.
- With power disconnected, inspect the tanks, hose, solution line and tool; prepare a suitable low-foam solution.
- Guide the tool in even, overlapping passes, limiting liquid application to the area being treated.
- Manage liquid and foam levels, then switch off and unplug before emptying and cleaning the liquid paths.
Three-in-one: onboard brush cleaning
- Pre-vacuum and assess the carpet, then inspect the brush, recovery head, tanks and hoses with power disconnected.
- Prepare suitable low-foam solution and organise the route, turning space and power cable.
- Move evenly so spraying, brush contact and recovery work along the route. Do not leave a powered brush running on one spot.
- After cleaning, isolate power, empty and clean the tanks and passages, and remove material wrapped around the brush.
HY32 cleans in backward passes. Keep space for turning and route the power cable away from the working path.
Carpet extraction, with hand-guided and onboard tools
The AC series uses a separate extraction tool, while the three-in-one machines combine spraying, brushing and water recovery along a carpeted route.
Guide the extraction tool around the room
The AC-602CS supplies cleaning solution and collects dirty water through a separate hose and extraction tool. Use the large tool for open carpet and the small tool for edges and local areas.
View AC-602CS specifications →Brush cleaning along a carpeted route
See the HY31 move along the carpet with its onboard cleaning head. Spraying, powered brushing and extraction form a working sequence for washable carpet, followed by tank emptying and cleaning.
View HY31 specifications →HY32 three-in-one carpet extractor
See the HY32 clean carpet with its onboard cleaning head and separate hand tool.
View HY32 specifications →Keep the liquid paths clean and the carpet protected
Prepare the right solution, manage liquid and foam during recovery, and disconnect power before cleaning or servicing the machine.
After each cleaning job
- Switch off and disconnect power before emptying, cleaning or clearing a blockage.
- Empty recovered wastewater and clean the approved tanks, tools and liquid passages; do not spray the motor head.
- Inspect nozzles, filters, seals, hose couplings and tool lips. Remove wrapped fibres from onboard brushes.
- Dry serviceable parts before storage and refer electrical or internal faults to qualified service personnel.
Protect the carpet and the operator
- Use a suitable low-foam extraction product at its specified dilution.
- Test colourfastness and consider moisture-sensitive fibres, backing and adhesives before wet treatment.
- Keep cables away from liquid, sharp edges and moving components.
- Ventilate after extraction and keep the area out of use until the carpet is ready for normal foot traffic. Where the material permits airflow-assisted drying, compare our floor dryers.
For associated supplies, see our commercial cleaning chemicals range.
Need help with a care or service item?
Share the model, fitted tool and part reference or photograph so the item can be matched to the machine.
Plan the machine and its working tools together
Choose the supplied equipment, extra tools and replacement items for the cleaning work your team needs to cover.
Machine & included equipment
Keep the selected model, supplied hose and tools together in the quotation and packing list. List the included equipment for each machine and put requested extras on separate lines.
Optional & compatible tools
Hand extraction tools and hoses are listed across both series, with replaceable tanks for the AC range. For upholstery, request a dedicated compatible tool and use it only on wet-cleanable fabric. Match the coupling, machine version and intended use as well as the connection diameter.
Consumables & wear parts
Plan suitable low-foam extraction detergent, serviceable filters, tool seals and hose wear parts. For brush-equipped models, include brush inspection and removal of wrapped fibres in daily care.
For associated supplies, see our commercial cleaning chemicals range.
Need a machine and tool package?
Tell us the model, carpet or upholstery task, and the tools or service items you want included in the quotation.
Set out your carpet-cleaning equipment order
Bring the model mix, working tools and destination requirements together for a clear purchasing discussion.
Models, tasks & quantities
List the exact models and quantity per model. Describe the carpet, furnished-room access or open cleaning route, and include any upholstery work in the tool request.
Equipment & service items
Separate included equipment from extra hand tools, hoses, replaceable AC tanks, consumables and service parts. Identify the machine version and fitted connection for each requested item.
Electrical supply & destination
Provide the destination, voltage, frequency and plug requirements. Add packaging, branding and inspection-document requests so the quotation can set out the agreed scope.
Ready for an itemised quotation?
Send the model shortlist, quantities and destination. We can discuss unit prices, included equipment, requested extras, minimum quantities and the proposed delivery schedule.
Source your commercial carpet-cleaning range from CLEVO
For importers, wholesalers and facility buyers, the purchase includes more than a machine model. Bring your equipment mix, order quantities, destination and service-part requirements into one sourcing discussion.
Two cleaning formats for different customers
Offer hose-and-tool machines for furnished rooms and brush-equipped extractors for continuous carpeted areas. You can build a focused range around your customers’ working routes rather than stocking models distinguished only by their names.
Identify your chosen machines and quantities per model so the quotation reflects the range you intend to sell or operate.
Keep equipment and delivery details together
For your purchasing and receiving teams, an itemised order gives one reference for machines, accessories, service parts and packaging. Include the electrical requirements and destination with your bulk-pricing request.
Branding, packaging, inspection documents and delivery arrangements belong in the written quotation for the selected order—not in a one-size-fits-all promise.
Keep product, parts and delivery details together
Organise service and receiving questions against the selected machine and its written order specification.
Model & configuration records
Keep the exact model, agreed electrical and pump specifications, supplied tools and service items with the quotation. Use that specification when placing the order and receiving the equipment.
Parts & inspection documents
For a tool or replacement item, send the model and a photograph or reference of the fitted assembly. Include any inspection-document needs with the model and destination requirements.
Packing & delivery planning
Use the packing dimensions for shipment planning and request overall machine dimensions for storage or access checks. Record the agreed packaging and proposed delivery arrangements with the written order.
Have a product or order question?
Tell us the model, tool, service item or receiving requirement you need to discuss.
Plan the cleaning method around the site
Use a hose-connected hand tool around furniture and a brush-equipped machine along accessible carpeted routes. Include the carpet construction, treatment area and drying access in the cleaning plan.
Carpet task · selected model · working route
Match wet-cleanable carpet, tool access and recovery to the task. Organise water handling and ventilation, and keep the area out of use until the carpet is ready for normal foot traffic.
Before you order
Practical answers about the cleaning method, power supply, accessories and wholesale purchasing.
Are these carpet shampoo machines steam cleaners?
No. These machines use wet extraction: cleaning solution is applied to the carpet and dirty liquid is recovered. DTJ2A, HY31 and HY32 also add powered brushing. They do not perform steam cleaning or completely dry the carpet during extraction.
Can I use a carpet extractor on sofas or upholstered seats?
Upholstery requires wet-cleanable fabric and a compatible dedicated hand tool. A carpet wand is not automatically suitable for sofa cushions or seat contours. Include seating work in your tool-package request so the machine connections and upholstery tool are matched to the task.
How long will the carpet take to dry?
Drying time varies with the carpet construction, liquid application, recovery and ventilation. Extraction removes dirty liquid, but the carpet still needs a drying period. Plan cleaning around a time when the area can remain out of use, and reopen it once the carpet is ready for normal foot traffic.
Do higher watts or airflow mean a larger cleaning area per hour?
Not by themselves. Watts describe electrical power, while airflow describes air volume rather than floor coverage. For example, HY31's 335 m³/h is airflow, not 335 square metres of carpet cleaned per hour. Tool or brush width, room access and the operator's working route also shape the job.
What power supply do these machines use?
The listed supply for all nine models is 220 V AC at 50 Hz. Include your market's voltage, frequency and plug requirements in the purchase specification. A model's input power, vacuum motor power and brush motor power are different fields, so they are kept separate in the product tables.
How do I request wholesale pricing for a mixed-model order?
List the models, quantity per model, cleaning tasks and destination. Add the tools and service parts you want priced with the machines. Your written quotation should separate unit prices, included equipment, additional accessories, minimum order quantities and the proposed delivery schedule, so you can compare the complete purchase.
Can I compare models before choosing a mixed order?
Yes. Select two to four models in the comparison, or start with an AC or three-in-one group. The full specification tables remain below. Send the final model names and quantities with the required tools, electrical supply and destination for an itemised quotation.
Build your carpet shampoo machine order
Get the catalogue information for the models on your shortlist, discuss the cleaning tasks your customers need to cover, or request itemised B2B pricing for your business.
The complete machine specifications stay on this page, ready for your team to compare.
Tell us what you need to source
- Models and quantity per model.
- Your cleaning task or distributor market.
- Destination, voltage, frequency and plug requirements.
- Additional tools, service parts and packaging needs.