Electric Ride-on Dust Mop Carts HY101 & HY102
Review HY101 and HY102 electric ride-on dust mop carts for routine dust mopping on compatible smooth hard floors. The operator drives while the front and rear mop assemblies collect suitable surface dust. Compare access space, loading, travel and electrical specifications, then request pricing for carts, replacement pads and the required charging configuration.
Choose a dust-mopping cart for your route
Choose a dust-mopping cart around the floor finish, access space and pad-service routine. Plan for the whole cart and fitted mop assemblies at doors and turns, with safe separation from pedestrians.
Need collection into a debris hopper instead? Explore the floor sweeper supply range for other cleaning formats.
HY101: 125 kg load specification
HY101 lists a 900 mm mopping width, a 125 kg maximum load and 8 in solid tyres. Check its 1650 × 900 × 850 mm product dimensions against the route and storage area.
View models and specifications →HY102: 150 kg load specification
HY102 lists a 150 kg maximum load and 10 in pneumatic tyres, with product dimensions of 1450 × 900 × 1250 mm. Review its complete electrical and handling specifications for the required configuration.
View models and specifications →Pad servicing and charging between rounds
Include pad cleaning or replacement, storage and battery charging in the daily routine. Travel range and maximum speed are separate specifications; use the actual route to plan work and servicing.
View models and specifications →Check the two models for your task
Compare HY101 and HY102 load, dimensions, tyres and electrical details. Open either model name for its complete specification table.
Two models, complete specifications
Both models are selected. Use each specification for the stated product and task.
| Specification | HY101 | HY102 |
|---|---|---|
| Turning radius | 1100 mm | 1100 mm |
| Drive motor | 24 V / 350 W | --- |
| Product dimensions | 1650 × 900 × 850 mm | 1450 × 900 × 1250 mm |
| Packing dimensions | 1100 × 510 × 490 mm | 1300 × 520 × 620 mm |
| Total weight | 58 kg (including battery) | 60 kg |
| Maximum speed | 9 km/h | 10 km/h |
| Range on a full charge | 25 km | 30–40 km |
| Maximum load | 125 kg | 150 kg |
| Motor power | 230 W | 500 W |
| Mopping width | 900 mm | --- |
| Maximum climbing grade | 16% | 15% |
| Obstacle-crossing height | 70 mm | 100 mm |
| Ground clearance | 90 mm | --- |
| Charger | 24 V / 2 A | --- |
| Tyres | 8 in solid tyres | 10 in pneumatic tyres |
| Battery weight | 13 kg | 15 kg |
| Battery | --- | 12 V / 12 Ah × 3 |
| Drive system | --- | 48 V / 700 W sine-wave vector motor |
| Charger model | --- | 48 V / 12 Ah (lithium battery) |
Electric Ride-on Dust Mop Carts models and specifications
Choose HY101 or HY102 to view its complete specifications beside the image and introduction. Keep maximum speed, travel range, load and mop-path information distinct. Use the full cart and pad arrangement for access planning, and the matched battery and charger for the supplied configuration.
No matching models. Try another name.
125 kg maximum-load cart
HY101 combines a front-and-rear mop arrangement, a listed 900 mm mopping width and 8 in solid tyres.
HY101
900 mm dust-mopping width
HY101
HY101 is an electric ride-on dust-mop cart with front and rear mop assemblies and a listed 900 mm mopping width. It specifies a 125 kg maximum load, 8 in solid tyres and 1650 × 900 × 850 mm product dimensions. Plan safe turns, pad servicing and storage around the cart and your compatible smooth-floor route.
| Specification | HY101 |
|---|---|
| Packing dimensions | 1100 × 510 × 490 mm |
| Product dimensions | 1650 × 900 × 850 mm |
| Total weight | 58 kg (including battery) |
| Maximum speed | 9 km/h |
| Range on a full charge | 25 km |
| Maximum load | 125 kg |
| Motor power | 230 W |
| Mopping width | 900 mm |
| Turning radius | 1100 mm |
| Maximum climbing grade | 16% |
| Obstacle-crossing height | 70 mm |
| Ground clearance | 90 mm |
| Charger | 24 V / 2 A |
| Tyres | 8 in solid tyres |
| Battery weight | 13 kg |
| Drive motor | 24 V / 350 W |
150 kg maximum-load cart
HY102 has a front-and-rear mop arrangement and 10 in pneumatic tyres. Check the complete supplied electrical configuration alongside the handling data.
HY102
Ride-on dust mopping with a 150 kg maximum load
HY102
HY102 combines front and rear mop assemblies with a 150 kg maximum-load specification and 10 in pneumatic tyres. The cart measures 1450 × 900 × 1250 mm and lists a 1100 mm turning radius. Review the full handling and electrical data, then plan dust mopping, pad changes and charging around your route.
| Specification | HY102 |
|---|---|
| Packing dimensions | 1300 × 520 × 620 mm |
| Product dimensions | 1450 × 900 × 1250 mm |
| Total weight | 60 kg |
| Maximum speed | 10 km/h |
| Range on a full charge | 30–40 km |
| Maximum load | 150 kg |
| Motor power | 500 W |
| Battery | 12 V / 12 Ah × 3 |
| Turning radius | 1100 mm |
| Maximum climbing grade | 15% |
| Obstacle-crossing height | 100 mm |
| Drive system | 48 V / 700 W sine-wave vector motor |
| Charger model | 48 V / 12 Ah (lithium battery) |
| Tyres | 10 in pneumatic tyres |
| Battery weight | 15 kg |
Dust-mop cart differences for your daily route
Compare the complete cart, load, tyres and travel specifications around the same floor route. Include pad condition, service stops and charging when planning the working routine.
Mop arrangement and floor contact
Both carts use a front-and-rear mop arrangement. HY101 lists a 900 mm mopping width. Check pad contact, fit and floor compatibility as part of a short representative trial.
Overall dimensions and turning space
HY101 measures 1650 × 900 × 850 mm; HY102 measures 1450 × 900 × 1250 mm. Both list a 1100 mm turning radius. Plan for the whole cart and mop assembly around doors and furniture.
Maximum load and handling
HY101 lists a 125 kg maximum load and 58 kg total weight including battery. HY102 lists a 150 kg maximum load and 60 kg total weight. Follow the model loading limits and approved operating conditions.
Travel range and working speed
HY101 lists 9 km/h maximum speed and 25 km range; HY102 lists 10 km/h and 30–40 km. Choose a controlled speed for the site and include turns, stops and pad servicing in the work plan.
Battery and matched charging
Use the battery and charger matched to the supplied cart. Keep the written battery, drive and charging configuration with your order and follow the equipment instructions for charging and storage.
For loose-debris collection into a hopper, explore our floor sweeper supply range.
Ride-on dust mopping: preparation to pad servicing
Use the cart on compatible smooth hard floors for routine dust mopping. Prepare the pads, separate the route from pedestrians and follow the operating instructions for the supplied model.
Front and rear mop pads
Fit the correct pads and check that the mop assemblies are secure. Inspect the floor contact and replace or service dirty pads before they spread collected material.
Pad lift and route access
Keep space for the fitted mop assemblies at doors and turns. Use the permitted lift and adjustment controls, and stop securely before inspecting or changing pads.
Driver controls and route monitoring
The driver controls movement and monitors the floor throughout the round. Use a controlled site-appropriate speed and stop for obstacles, poor collection or unusual noise.
Battery and charging routine
Keep electrical components dry and use the battery and charger supplied for the cart. Charge and store the equipment according to the matched instructions.
Your working sequence
- Inspect the floor and route. Remove sharp, oversized or wet waste separately, and plan safe separation from pedestrians and vehicles.
- Inspect pad fit, wheels, steering and controls. Check battery condition and keep the charging equipment away from the working route.
- Test a short section with clean, correctly fitted pads. Drive at a controlled speed and inspect floor contact and dust pickup before continuing.
- Slow at corners and around obstacles. Monitor pad condition and stop for service when dust builds up, collection drops or parts become damaged.
- Park securely and isolate power before servicing. Clean or replace pads using the approved method and follow the battery and charger instructions before the next shift.
See the HY102 dust-mopping cart in use
Watch the HY102 demonstration, then review that model’s complete specifications. HY101 is listed separately in the model reader with its own data.
HY102 controls and dust mopping
Watch the HY102 controls, mop lift and floor-cleaning routine. Use the complete specifications below to check the cart against your route and order requirements.
Care and safe use for your dust-mop cart
Park securely and isolate power before pad changes or maintenance. Keep the floor-contact parts clean and use the matched battery and charger instructions.
Routine care
- Service dirty pads after use and whenever collection drops. Stop the cart and isolate power before clearing tangles or changing fitted parts.
- Inspect pad holders, fasteners, wheel condition, steering and controls. Fit replacement pads against the exact model and installed assembly.
- Keep water jets away from electrical parts. Clean only approved components using the prescribed method and dry them before storage.
- Follow the matched battery and charger instructions. Stop work for damaged wiring, unusual noise or steering problems and arrange service before reuse.
Safe dust-mopping routes
- Use for suitable loose surface dust on compatible floors. Do not use the carts for standing-water recovery, hot or burning waste, flammable materials or unapproved hazardous dust.
- Keep hands and feet clear of moving components. Stop and isolate power before inspecting pads, removing tangles or adjusting the assemblies.
- Separate driving routes from pedestrians and vehicles. Follow the cart’s loading, gradient and surface limits; approach turns at a controlled speed and avoid steps or blocked routes.
Need help with a replacement?
Identify the cart and fitted mop assembly when requesting replacement pads or service items.
Pads and service items for HY101 and HY102
Keep mop pads, fitted holders and electrical service items with the exact HY101 or HY102 cart configuration.
Replacement dust-mop pads
Request replacement dust-mop pads by holder, pad dimensions and floor-contact requirement. Keep clean pads available for service changes during the route.
Mop holders and fitted connections
Identify the front or rear assembly and fitted connection when ordering holders or related items. A photograph of the installed part helps identify the requested component.
Battery and matched charger
Use the battery and charger matched to the supplied cart. State the destination electrical requirements and keep the written charging configuration with the machine order.
Wheels and other service items
HY101 lists 8 in solid tyres; HY102 lists 10 in pneumatic tyres. Order wheels and other replacement items for the exact model and installed component.
Planning pads and service stock?
Send the cart model, fitted pad or part details and the quantities needed alongside your machine order.
Plan your dust-mop cart order
Order HY101 or HY102 around the floor route, access space and intended working routine. Keep model configuration and service items together in the written request.
Models and quantities
List the number of HY101 and HY102 carts separately, with floor type, door and turn restrictions and the intended working schedule.
Pads and service stock
Separate the supplied package from extra mop pads, holders and other requested service items. Identify each extra against its cart and fitted assembly.
Charging, packing and destination
Send destination, packing needs and charging electrical requirements. Your offer identifies the supplied configuration, requested extras, MOQ and lead time.
Ready for a cart quotation?
Send cart quantities, delivery destination and the pad or service items you need.
Electric ride-on dust-mop cart supply from CLEVO
CLEVO supplies HY101 and HY102 ride-on dust-mop carts for commercial floor-maintenance teams and distributors. Build your order around floor access, the dust-mopping routine and the matched electrical configuration.
For wider equipment sourcing, visit our commercial cleaning equipment range.
Describe your floor and route
Send the floor finish, typical surface dust and door or turn restrictions. Include the working schedule and storage or charging space.
Plan carts, pads and charging
List cart quantities by model, with the fitted battery and charger arrangement. Identify additional pads and service items separately for the correct cart.
Set out your bulk-order details
Send your destination and packing requirements. Your written quotation identifies configuration, supplied items, requested extras, MOQ and lead time for that order.
Support for your ride-on dust-mop cart
Use the exact cart and fitted assembly when arranging pads, charging equipment and delivery. Keep the agreed electrical configuration with your order.
Pads and model-specific replacements
Identify the HY101 or HY102 cart, front or rear assembly and required part. Include dimensions, quantity and a fitted-part photograph where useful.
Battery and charger configuration
Follow the battery and matched charger instructions before use or replacement. Include destination electrical requirements in the purchase specification.
Packing and supply details
Provide destination and cart quantities for the delivery request. Keep supplied contents, packing, MOQ and lead time in the written offer.
Have a cart or order question?
Tell us the cart and the pad, component, charging or delivery details you need. You can also request the model documents needed for your sourcing review.
Dust-mopping routes on smooth commercial floors
Smooth lobby floors, wide corridors and other compatible hard-floor areas can form part of a routine dust-mopping route. Check the floor finish, surface dust and available space before use.
Plan access, pad servicing and safe driving
Allow for the full cart and mop assemblies at doors and turns, with pedestrians separated from the work. Include pad cleaning, replacement and charging in the routine.
Electric Ride-on Dust Mop Carts buying questions
Answers for your model shortlist, operation and purchasing plan.
What does a ride-on dust-mop cart do?
It carries the operator while fitted mop pads collect suitable loose surface dust from compatible smooth hard floors. The driver controls movement and monitors the cleaning result.
Is this a hopper sweeper or scrubber dryer?
The carts use mop pads for dust mopping. For collection into a debris hopper, choose a suitable sweeper; for wet scrubbing and dirty-water recovery, choose suitable floor-scrubbing equipment.
Which models are on this page?
HY101 and HY102. Each has its own complete specification table and product image. The video demonstration on this page is for HY102.
What working width is listed?
HY101 lists a 900 mm mopping width. Check the full fitted pad arrangement and access space for the cart you order; the complete dimensions are listed in each model table.
How do the maximum loads differ?
HY101 lists 125 kg and HY102 lists 150 kg. Follow the supplied model instructions for loading and permitted operating conditions.
Can I plan cleaning output from travel range?
Travel range is a distance specification. Floor conditions, speed, turns, stops and pad servicing affect the actual work completed; use a representative route trial for scheduling.
Are these carts autonomous?
An operator drives and monitors each cart. Plan attended operation and controlled speeds, with safe separation from pedestrians and vehicles.
Can I use the cart for wet spills or hazardous dust?
Use it only for suitable loose surface dust within its approved application. Wet spills, hot or burning material, flammable materials and unapproved hazardous dust need specifically suitable methods and equipment.
What should I send for a wholesale quotation?
Send HY101 or HY102 quantities, floor and route details, destination, packing needs and requested pads or service parts. Include the required charging configuration.
Which pads, batteries and chargers are included?
The quotation identifies the supplied configuration and contents for each model. Extra pads and replacement items are itemised separately. Use the battery and charger matched to the supplied cart.
Request ride-on dust-mop cart pricing
Get model-based pricing for HY101 or HY102 and the service items you need.
Share the floor, route and quantities, with the requested battery, charger and pad-service requirements.
Tell us what you need to source
- Floor finish, surface dust and route access
- HY101 or HY102 and quantities
- Battery, matched charger and requested service items
- Working schedule and delivery destination