CLEVO Logo CLEVO
Cleaning tools · CLEVO

Commercial Floor Squeegees Supplier

Choose a commercial floor squeegee around the floor, water-removal route and working width. CLEVO offers straight and curved steel heads, plastic sponge formats, replaceable-strip designs and wide upright water pushers. Compare 45–75 cm head options, wiping material and handle arrangements to prepare a clearly specified wholesale order.

Compare Models
Straight steel sponge floor squeegee C-029 / C-030 / C-031
Steel headsStraight steel sponge floor squeegee family; select the required reference and size.
Wide floor water pusher C-027A
Wide water pushersWide floor water pusher.
Start with your task

Choose the format around the cleaning task

Compare straight or curved geometry, working width, wiping material and handle scope.

View all cleaning tools

Straight or curved head

Straight heads keep a simple crosswise working edge, while curved heads change the outline presented to the water. Compare the route toward the collection or drainage point and the available turning space. A curved design is a geometry choice, not a guarantee that every floor will clear in one pass.

Sponge or rubber working edge

The steel families distinguish double 5 cm sponge-strip designs from single 5 cm rubber-strip designs. Plastic options use broader sponge or foam-rubber strips. Choose the contact material for the floor texture, liquid and routine, and keep the full reference on replacement orders.

Working width and handling format

Standard families include 45, 55 and 75 cm widths, with 55 and 75 cm curved options. C-027A and C-028A use wider upright water-pusher frames. Compare the smallest access point and the operator’s working position alongside the open area to be cleared.

Model comparison

Compare the options on your shortlist

Choose two to four of the 8 product entries or families. Compare matching fields, then open a model for its full product information.

Choose a starting group

Select 2–4 models. Open a model name in the table to view its full specifications.

Product references
Selected specifications
Specification Straight steel sponge floor squeegee C-029 / C-030 / C-031 C-029 / C-030 / C-031 Straight steel rubber floor squeegee C-023 / C-024 / C-025 C-023 / C-024 / C-025 Curved steel sponge floor squeegee C-033 / C-034 C-033 / C-034
Product specification
Type Straight steel sponge floor squeegee Straight steel rubber floor squeegee Curved steel sponge floor squeegee
Size / variants 45 / 55 / 75 cm 45 / 55 / 75 cm 55 / 75 cm
Material Steel body; two 5 cm sponge strips Steel body; one 5 cm rubber strip Steel body; two 5 cm sponge strips
Carton dimensions C-029: 47 × 27 × 27.5 cm; C-030: approx. 57 × 27 × 27.5 cm; C-031: approx. 77 × 34 × 22 cm C-023: 44.5 × 25.5 × 12 cm; C-024: 54.5 × 25.5 × 12 cm; C-025: 75.5 × 25 × 12 cm C-033: 57 × 22 × 19 cm; C-034: 76 × 28 × 31 cm
Packing 50 pcs/carton 30 pcs/carton 50 pcs/carton
Product Information
Product range

View Full Product Information

Choose a product family or search a model to explore its design, dimensions, colours and packing. Each item has its own enquiry button.

C-029 / C-030 / C-031

Straight steel sponge floor squeegee

Straight steel sponge floor squeegee C-029 / C-030 / C-031
Straight steel sponge floor squeegee family; select the required reference and size.

Straight steel sponge floor squeegee

The straight head carries two sponge strips. Compare the working width with aisles, drainage points and the route used to collect water. The available references are C-029 / C-030 / C-031.

Product information

Type Straight steel sponge floor squeegee
Size / variants 45 / 55 / 75 cm
Material Steel body; two 5 cm sponge strips
Colour / finish ---
Carton dimensions C-029: 47 × 27 × 27.5 cm; C-030: approx. 57 × 27 × 27.5 cm; C-031: approx. 77 × 34 × 22 cm
Packing 50 pcs/carton
Supply format Quotation basis: head only; handle optional

C-023 / C-024 / C-025

Straight steel rubber floor squeegee

Straight steel rubber floor squeegee C-023 / C-024 / C-025
Straight steel rubber floor squeegee family; select the required reference and size.

Straight steel rubber floor squeegee

A single rubber strip provides the wiping edge on this straight steel head. This is a different construction from the double-sponge version, so the complete reference matters when ordering. The available references are C-023 / C-024 / C-025.

Product information

Type Straight steel rubber floor squeegee
Size / variants 45 / 55 / 75 cm
Material Steel body; one 5 cm rubber strip
Colour / finish ---
Carton dimensions C-023: 44.5 × 25.5 × 12 cm; C-024: 54.5 × 25.5 × 12 cm; C-025: 75.5 × 25 × 12 cm
Packing 30 pcs/carton
Supply format Quotation basis: head only; handle optional

C-033 / C-034

Curved steel sponge floor squeegee

Curved steel sponge floor squeegee C-033 / C-034
Curved steel sponge floor squeegee family; select the required reference and size.

Curved steel sponge floor squeegee

The curved outline changes the way the head presents to a pool of water. Check the turning space around equipment and drains when selecting the width. The available references are C-033 / C-034.

Product information

Type Curved steel sponge floor squeegee
Size / variants 55 / 75 cm
Material Steel body; two 5 cm sponge strips
Colour / finish ---
Carton dimensions C-033: 57 × 22 × 19 cm; C-034: 76 × 28 × 31 cm
Packing 50 pcs/carton
Supply format Quotation basis: head only; handle optional

C-027 / C-028

Curved steel rubber floor squeegee

Curved steel rubber floor squeegee C-027 / C-028
Curved steel rubber floor squeegee family; select the required reference and size.

Curved steel rubber floor squeegee

A curved metal head and single rubber strip form this version. The curve, width and wiping material should be considered together when comparing it with a straight head. The available references are C-027 / C-028.

Product information

Type Curved steel rubber floor squeegee
Size / variants 55 / 75 cm
Material Steel body; one 5 cm rubber strip
Colour / finish ---
Carton dimensions C-027: 54 × 25.5 × 13.5 cm; C-028: 74 × 25.5 × 13.5 cm
Packing 30 pcs/carton
Supply format Quotation basis: head only; handle optional

C-035 / C-036 / C-037

Plastic sponge floor squeegee

Plastic sponge floor squeegee C-035 / C-036 / C-037
Plastic sponge floor squeegee family; select the required reference and size.

Plastic sponge floor squeegee

A plastic head supports a broad sponge strip. Check the head shape and the selected handle arrangement against the working floor and storage area. The available references are C-035 / C-036 / C-037.

Product information

Type Plastic sponge floor squeegee
Size / variants 45 / 55 / 75 cm
Material Plastic body; 10 cm sponge strip
Colour / finish ---
Carton dimensions C-035: 50 × 28 × 45 cm; C-036: 61 × 28 × 41 cm; C-037: 82 × 28 × 45 cm
Packing 20 pcs/carton
Supply format Quotation basis: head only; handle optional

C-035A / C-036A / C-037A

Replaceable-strip floor squeegee

Replaceable-strip floor squeegee C-035A / C-036A / C-037A
Replaceable-strip floor squeegee family; select the required reference and size.

Replaceable-strip floor squeegee

The wiping strip is retained with two screws for replacement. Keep the A suffix with the order so the serviceable head is distinguished from the other plastic range. The available references are C-035A / C-036A / C-037A.

Product information

Type Replaceable-strip floor squeegee
Size / variants 45 / 55 / 75 cm
Material Plastic body; 10 cm foam-rubber strip
Colour / finish ---
Carton dimensions C-035A: 50 × 28 × 45.5 cm; C-036A: 61 × 28 × 48.5 cm; C-037A: 82 × 28 × 47.5 cm
Packing Heads: 20/carton; handles: 20/bundle
Supply format Quotation basis: head only; handle optional

C-027A

Wide floor water pusher

Wide floor water pusher C-027A
Wide floor water pusher.

Wide floor water pusher

C-027A combines an 85 cm working width with a stainless-steel upright frame in an 85 × 135 cm format. The two-handed layout suits a broad collection path. Compare the full width, turning clearance and storage position with the area where the tool will be used.

Product information

Type Wide floor water pusher
Size / variants 85 × 135 cm
Material Stainless-steel frame
Colour / finish ---
Carton dimensions 141 × 13 × 31 cm
Packing 2 pcs/carton
Supply format Water pusher shown

C-028A

Wide floor water pusher

Wide floor water pusher C-028A
Wide floor water pusher.

Wide floor water pusher

C-028A uses an aluminium-alloy upright frame in a 96 × 150 cm format. The wider working span provides another option for open floor areas. Compare the footprint with doorways, turning points and the route to storage when selecting between the two water pushers.

Product information

Type Wide floor water pusher
Size / variants 96 × 150 cm
Material Aluminium-alloy frame
Colour / finish ---
Carton dimensions 150 × 43 × 14 cm
Packing 2 pcs/carton
Supply format Water pusher shown
Buying decisions

Details that change the working setup

Compare the construction, dimensions and supply form of the commercial floor squeegees you are considering.

Head construction and replacement design

Steel and plastic head families offer different constructions, while the A-suffix plastic range retains its wiping strip with two screws. Keep the replaceable-strip reference separate from the other plastic models when ordering or planning service stock.

Heads, handles and complete assemblies

The standard ranges use a head-only quotation basis, with an optional handle identified as a separate order item. This lets you replenish worn heads or specify a complete working tool. The replaceable-strip range also has separate packing units for heads and handles; C-027A and C-028A use an upright-frame assembly.

Wide pushers and storage clearance

The two upright water pushers have 85 × 135 cm and 96 × 150 cm formats. Their wider footprint needs room along the work route and at the storage position. Compare those dimensions before treating a broad tool as a replacement for a narrower hand-operated squeegee.

Need help choosing the right configuration?

Compare straight or curved geometry, working width, wiping material and handle scope.

Use guide

Put the selected tools into a practical routine

Plan the water-collection route, controlled passes and final inspection of the wet area.

Plan the collection route

Identify a suitable water-collection or drainage point and remove debris that could obstruct the wiping edge. Keep the working area managed while the floor is wet.

Move the liquid in controlled passes

Choose the working angle and direction for the floor and selected head. Maintain control of the handle and avoid striking fixtures or forcing the edge across obstructions.

Finish and inspect the area

Collect remaining liquid as required by the site routine and check the walking surface before returning the area to use. A squeegee pass alone is not proof that every surface is dry or slip-free.

Planning tools for your cleaning routine?

Plan the water-collection route, controlled passes and final inspection of the wet area.

Care and inspection

Protect the working surface and the tool

Check the wiping edge, retaining screws and handle connection.

Clean the wiping edge

Rinse away residue as appropriate for the liquid and let the working edge dry. Check for tears, distortion and trapped debris that can change contact with the floor.

Inspect fasteners and handles

Check the head connection and any strip-retaining screws. Replace damaged parts with the correct form and store the tool where the edge will not be compressed or bent by other equipment.

Have a care or replacement question?

Check the wiping edge, retaining screws and handle connection.

Parts and related supplies

Plan the related parts and replenishment items

Identify replacement strips and matched handles by the exact head reference.

Replacement wiping strips

For the A-suffix plastic range, identify the exact head and strip-retention arrangement. For other designs, confirm the required replacement form rather than assuming every strip can be exchanged in the same way.

Matched handles

Include the intended head reference and connection when requesting a handle. Handle length, end fitting and supplied scope need to be agreed for the selected tool.

Related wet-floor supplies

Buckets, liquid collection equipment and warning signs may support the wider routine. They remain separate items unless specifically included in the quotation.

Complete your tools and spare-parts list

Identify replacement strips and matched handles by the exact head reference.

Ordering and delivery

Prepare an itemised purchase request

A complete specification makes the quotation and repeat order easier to identify.

Build the order around the working set

List the selected commercial floor squeegees references with their sizes, colours and quantities. Separate complete tools from replacement parts. This keeps the quoted scope clear where one photograph shows several sizes or where a head and handle can be purchased separately.

Plan replacements alongside new tools

Identify replacement strips and matched handles by the exact head reference. You can divide quantities between initial equipment and replenishment stock. Keeping the product code and selected configuration in your purchase record makes later orders easier to reproduce.

Review packing and supply terms

Include the destination and requested delivery date with your enquiry. The quotation should identify the agreed packing, quantity, lead time and delivery terms for your order. Where freight planning is needed, you can use the confirmed carton dimensions and weights to request a transport quotation.

OEM and ODM for your product range

We offer OEM and ODM support for commercial floor squeegees projects. Share the intended use, brand artwork, preferred colours, size requirements and packaging brief. For a new design, drawings and the working conditions help define the project. We can review the proposed specification, sample or tooling requirements and commercial scope with you before the project is agreed.

Ready to price the order?

Send the selected references, quantities and destination.

CLEVO supply range

Source a coordinated range for your business

Build a commercial floor squeegees order for facilities, cleaning contractors or distribution, with clear references and an agreed supply scope.

Straight steel sponge floor squeegee C-029 / C-030 / C-031
Straight steel sponge floor squeegee family; select the required reference and size.
For purchasing teams and distributors

An assortment built around real tasks

Plan the water-collection route, controlled passes and final inspection of the wet area. A distributor assortment can combine the formats customers use together, while a facility order can be divided by area or team. Compare straight or curved geometry, working width, wiping material and handle scope.

Curved steel rubber floor squeegee C-027 / C-028
Curved steel rubber floor squeegee family; select the required reference and size.
For purchasing teams and distributors

Clear identification from first order to refill

Identify replacement strips and matched handles by the exact head reference. Keep the full reference, size and supply form on the quotation and receiving list. This is especially useful when a family photograph shows several versions or a similar-looking component has a different connection.

Wide floor water pusher C-028A
Wide floor water pusher.
For purchasing teams and distributors

Standard products and custom projects

Our commercial floor squeegees range gives buyers a starting point for standard-product enquiries and OEM or ODM discussions. Colour, branding, packaging and design requests can be reviewed against the selected product and project scope. The agreed quotation defines what is included and which details require a sample.

Product and order support

Make support requests specific

Use the product reference and the affected detail to explain a replacement, use or order question.

Product selection and fit

Check the wiping edge, retaining screws and handle connection. If a replacement needs to join an existing tool, a photograph of the connection and the full product reference help identify the requirement.

Receiving and replacement questions

Check the delivered reference, configuration and quantity against the agreed order. If an item needs attention, share the order number and clear photographs of the affected part so the question can be reviewed accurately.

Keep the order documents

Retain the model list, quantities and agreed supply terms. Include the order reference when raising a product or delivery question.

Have a product or order question?

Share the reference and the detail you need help with.

Application planning

Select by working area and access

Choose commercial floor squeegees for the working area, cleaning routine and access available at your site.

Washdown and service areas

Compare wiping material and width against the actual floor texture and liquid route. The selected head should fit around fixtures and the collection point.

Open floor areas

A broader head or upright pusher may suit a wide working space. Check doorway, turning and storage clearances before selecting the larger format.

Distributor floor-care assortments

Group straight and curved heads by material and width, with replaceable-strip versions clearly identified. Include the handle scope on each line so buyers can compare like-for-like offers.

Build a shortlist for your site

Share the working area, selected commercial floor squeegees and quantities.

B2B buying questions

Before you order

Answers about product choice, routine use and purchasing details.

What widths are available in the standard ranges?

The straight and plastic families offer 45, 55 and 75 cm versions. The curved steel families offer 55 and 75 cm versions.

Which range has a replaceable strip?

C-035A/C-036A/C-037A use a strip retained with two screws. Keep the A suffix when identifying this version.

Does every squeegee include a handle?

The standard head ranges are quoted as heads only, with handles listed separately when required. C-027A and C-028A are upright water-pusher assemblies. Your quotation identifies the selected head, handle or complete assembly and its packing unit.

Will a floor squeegee leave every floor completely dry?

No universal drying or slip-resistance result is claimed. The floor texture, liquid, edge condition and working method affect the result, and the area still needs to be checked.

Can you support OEM or ODM orders?

Yes. We offer OEM and ODM support for commercial floor squeegees projects. Share the design, colour, branding and packaging requirements. The agreed scope, sample or tooling needs, order quantity and commercial terms are confirmed for the specific project.

How do I request a wholesale quotation?

Include the commercial floor squeegees references, selected sizes or colours, quantities and destination. List any required replacement parts separately. If the product has to fit existing equipment, include its reference and connection details so the enquiry describes a complete requirement.

Ready to confirm the purchasing details?

Send the references, quantities and any remaining commercial floor squeegees questions.

Product information · selection · bulk pricing

Request commercial floor squeegees wholesale pricing

Get a product-based quotation for your business.

Choose your commercial floor squeegees references, sizes and quantities. You can include the working surfaces, preferred colours and any spare items so we can prepare a clear quotation for the complete requirement.

Tell us what you need to source

  1. Complete model or specification references
  2. Quantities and selected configurations
  3. Application and related supply requirements
  4. Delivery destination and requested schedule