CLEVO Logo CLEVO
Commercial floor scrubber · Model selection

Industrial Floor Scrubbers Compare 29 Models

Compare 29 commercial floor scrubber models from CLEVO. Choose a compact machine for local cleaning, a walk-behind for divided zones, or a ride-on where longer routes allow safe turns. Whether you buy for a distributor, cleaning contractor or facility team, use the complete specifications below to build your shortlist. Then request pricing for your selected machines and service parts.

Compare Models
HY50B3 Walk-behind Scrubber Dryer
HY50B3Walk-behind Scrubber Dryer
HY75B Ride-on Scrubber Dryer
HY75BRide-on Scrubber Dryer
Start with your task

Choose the working format for your site

Map the route before choosing tank size, because short sections, frequent turns and open areas place different demands on your operator. If your site has several floor layouts, plan the machine format for each zone.

01 / Application

Compact machines for local cleaning

Use HYM1, HYM3 or HYM5 for short sections of water-compatible hard floor around entrances, furniture and small public areas. Compare the working head, actual access space and the distance to filling and draining points.

View models and specifications → All compact floor scrubbers →
02 / Application

Walk-behinds for connected work zones

Choose a walk-behind when your operator will guide the machine through corridors and separate floor areas. Corded models need suitable outlets and safe cable routes; battery models need a charging plan between jobs.

View models and specifications → All walk-behind floor scrubbers →
03 / Application

Ride-ons for longer open routes

Consider a ride-on where the route allows seated driving and safe turns. Match the cleaning path and squeegee to the building, then size the tanks around water service points. HY16 also provides sweeping for routes with loose debris and attached soil.

View models and specifications → All ride-on floor scrubbers →
Compare floor scrubbers

Compare commercial floor scrubber models

Choose two to four models to compare cleaning widths, tank capacities and electrical details. Then follow each model name to its complete specifications before building your order shortlist.

Choose a starting group

Select 2–4 models. Each model name in the table links to its full specifications.

HYM compact models
Walk-behind models
Ride-on and sweeper-scrubber models
3 models selected · 12 fields shown
Specifications for the selected floor scrubbers
Specification HYM3 commercial floor scrubberHYM3 HYM1 commercial floor scrubberHYM1 HYM5 commercial floor scrubberHYM5
Working width 280 mm 520 mm 350 mm
Solution tank capacity 6 L 6 L 13 L
Recovery tank capacity 9 L 9 L 15 L
Squeegee width 340 mm --- 420 mm
Maximum working productivity 800 m²/h 1200 m²/h 1000 m²/h
Battery operating time 1.5 h 1.5 h 2 h
Scrubbing brush speed --- 350 rpm ---
Battery 12 A 12 Ah 2 × 12 V 32 Ah
Brush motor power 200 W 160 W × 2 400 W
Water recovery motor power 120 W 120 W 400 W
Product dimensions 584 × 401 × 1040 mm 518 × 377 × 1208 mm 720 × 450 × 1030 mm
Net weight 20 kg 24 kg 60 kg
View all product specifications

Need the product range and supply information?

View product overview →
Commercial floor-cleaning machines

Commercial Floor Scrubber Models and Specifications

Explore all 29 commercial floor scrubber models in one place. The range is organized into compact, walk-behind and ride-on machines, with a product image, model overview and specification table for each model.

Compact Floor Scrubbers

The compact range includes HYM3, HYM1 and HYM5 for local sections of compatible hard floor. These machines combine solution delivery, scrubbing and recovery in a compact format, with individual specifications for cleaning width and tank capacity.

HYM3

280 mm working width for local hard-floor tasks

HYM3 Lightweight Floor Scrubber
HYM3

HYM3

For local cleaning, HYM3 has a 280 mm working width, a 340 mm squeegee and separate 6 L solution and 9 L recovery tanks. Choose this smaller cleaning path for local sections where your team needs to guide the head around the layout. The machine weighs 20 kg net and lists a 24 V supply. Plan the route using its full product dimensions as well as the working head, including access to water and waste disposal.

Complete product specifications
Specification HYM3
Product dimensions 584 × 401 × 1040 mm
Net weight 20 kg
Maximum working productivity 800 m²/h
Squeegee width 340 mm
Working width 280 mm
Solution tank capacity 6 L
Voltage 24 V
Battery 12 A
Brush motor power 200 W
Water recovery motor power 120 W
Battery operating time 1.5 h
Recovery tank capacity 9 L

HYM1

520 mm working width with 6 L / 9 L tanks

HYM1 Lightweight Floor Scrubber
HYM1

HYM1

The HYM1 combines a listed 520 mm working width with a 6 L solution tank and 9 L recovery tank. That combination suits a route divided into short cleaning sections, with water servicing planned between them. Its net weight is 24 kg and it uses a 24 V supply. For your shop or facility equipment list, compare the cleaning path with the space available around furniture and at turns, including the full machine and fitted squeegee.

Watch HYM1 on YouTube ↗
Complete product specifications
Specification HYM1
Product dimensions 518 × 377 × 1208 mm
Net weight 24 kg
Maximum working productivity 1200 m²/h
Scrubbing brush speed 350 rpm
Working width 520 mm
Solution tank capacity 6 L
Voltage 24 V
Battery 12 Ah
Brush motor power 160 W × 2
Water recovery motor power 120 W
Battery operating time 1.5 h
Recovery tank capacity 9 L

HYM5

350 mm working width with larger compact-series tanks

HYM5 Lightweight Floor Scrubber
HYM5

HYM5

In the compact range, HYM5 has a 350 mm working width and 13 L solution tank, with a 15 L tank for recovered water. These larger tanks distinguish it from the 6 L compact models when your local route has longer sections between water stops. Its 420 mm squeegee is wider than the cleaning path, and net weight is 60 kg. Include the full machine size and handling requirements when planning storage or movement between work areas.

Complete product specifications
Specification HYM5
Product dimensions 720 × 450 × 1030 mm
Net weight 60 kg
Maximum working productivity 1000 m²/h
Squeegee width 420 mm
Working width 350 mm
Solution tank capacity 13 L
Voltage 24 V
Battery 2 × 12 V 32 Ah
Brush motor power 400 W
Water recovery motor power 400 W
Battery operating time 2 h
Recovery tank capacity 15 L

Walk-Behind Floor Scrubbers

Explore 11 walk-behind models for connected work zones. The range includes corded and battery machines, with individual tables covering cleaning width, tank capacities, power specifications and machine dimensions.

HY46B

457 mm cleaning path with 22 L / 24 L tanks

HY46B Walk-behind Scrubber Dryer
HY46B

HY46B

For short work zones, HY46B pairs a 457 mm working width with a 550 mm squeegee and 22 L solution / 24 L recovery tanks. This water-handling arrangement suits comparison for short, separate work zones where your operator walks behind the machine. It shares the listed cleaning path and tank capacities of HY46C, with a different 103 kg net weight. Keep net and gross weights separate when your team plans machine handling and shipment.

Complete product specifications
Specification HY46B
Packing dimensions 900 × 630 × 875 mm
Net weight 103 kg
Gross weight 122.4 kg
Maximum working productivity 1500 m²/h
Squeegee width 550 mm
Working width 457 mm
Brush diameter 18 in
Solution tank capacity 22 L
Recovery tank capacity 24 L
Scrubbing brush speed 155 rpm
Scrubbing brush pressure 25 kg
Voltage 24 V DC
Brush motor power 550 W
Water recovery motor power 300 W
Battery operating time 2 h
Charging time 8 h
Battery 12 V DC × 2
Accessories Scrubbing brush × 1; pad driver × 1

HY46C

Corded 457 mm machine with 22 L / 24 L tanks

HY46C Walk-behind Scrubber Dryer
HY46C

HY46C

Where a mains supply is available, HY46C is a corded walk-behind for routes with access to a 220 V AC, 50 Hz supply. It has a 457 mm working width, a 550 mm squeegee and 22 L solution / 24 L recovery tanks. The 52 kg net weight is separate from its packing weight. Use this model in your equipment comparison when the tank size suits shorter cleaning sections and your team can keep the power cable clear of traffic and the cleaning head.

Complete product specifications
Specification HY46C
Packing dimensions 900 × 630 × 875 mm
Net weight 52 kg
Gross weight 71 kg
Maximum working productivity 1350 m²/h
Squeegee width 550 mm
Working width 457 mm
Brush diameter 18 in
Scrubbing brush speed 170 rpm
Scrubbing brush pressure 25 kg
Voltage 220 V AC / 50 Hz
Brush motor power 600 W
Water recovery motor power 400 W
Solution tank capacity 22 L
Recovery tank capacity 24 L
Accessories Scrubbing brush × 1; pad driver × 1

HY45C

Corded 457 mm machine with 33 L / 31 L tanks

HY45C Walk-behind Scrubber Dryer
HY45C

HY45C

For a corded route, HY45C provides a 457 mm working width with a 33 L solution tank and 31 L recovery tank. It runs from a 220 V AC, 50 Hz supply, making outlet position and cable management part of your route plan. The 760 mm squeegee needs more space than the cleaning path. Its listed net weight is 59 kg, so keep the machine and packing weights separate when comparing handling and delivery requirements.

Complete product specifications
Specification HY45C
Packing dimensions 1050 × 610 × 1190 mm
Net weight 59 kg
Gross weight 88 kg
Maximum working productivity 2000 m²/h
Squeegee width 760 mm
Working width 457 mm
Brush diameter 18 in
Scrubbing brush speed 170 rpm
Scrubbing brush pressure 25 kg
Voltage 220 V AC / 50 Hz
Brush motor power 550 W
Water recovery motor power 400 W
Solution tank capacity 33 L
Recovery tank capacity 31 L
Accessories Scrubbing brush × 1; pad driver × 1

HY45C-2

Corded 457 mm model, listed net weight 66 kg

HY45C-2 Walk-behind Scrubber Dryer
HY45C-2

HY45C-2

Within the corded range, HY45C-2 shares the listed 457 mm working width, 33 L solution tank and 31 L recovery tank of HY45C. It also specifies a 220 V AC, 50 Hz supply and a 760 mm squeegee. The documented distinction includes its 66 kg net weight, compared with 59 kg for HY45C. Keep the exact model on your quotation and service records so your purchasing and maintenance teams receive the corresponding machine information.

Watch HY45C-2 on YouTube ↗
Complete product specifications
Specification HY45C-2
Packing dimensions 1050 × 610 × 1190 mm
Net weight 66 kg
Gross weight 95.7 kg
Maximum working productivity 2000 m²/h
Squeegee width 760 mm
Working width 457 mm
Brush diameter 18 in
Scrubbing brush speed 170 rpm
Scrubbing brush pressure 25 kg
Voltage 220 V AC / 50 Hz
Brush motor power 550 W
Water recovery motor power 400 W
Solution tank capacity 33 L
Recovery tank capacity 31 L
Accessories Scrubbing brush × 1; pad driver × 1

HY2

Corded 457 mm scrubber with a listed 18 m cable

HY2 Walk-behind Scrubber Dryer
HY2

HY2

On a corded cleaning route, HY2 combines a 457 mm working width with equal 30 L solution and recovery tanks. Its listed 18 m power cord gives your team a concrete starting point for planning outlet locations and keeping the lead away from pedestrian routes. The machine requires a 220 V, 50 Hz supply and has a 760 mm squeegee. Compare this tank size with the larger HY51C when deciding how to divide a corded cleaning route.

Complete product specifications
Specification HY2
Packing dimensions 1050 × 610 × 1190 mm
Net weight 76 kg
Gross weight 102 kg
Maximum working productivity 2000 m²/h
Squeegee width 760 mm
Working width 457 mm
Solution tank capacity 30 L
Recovery tank capacity 30 L
Scrubbing brush speed 175 rpm
Scrubbing brush pressure 25 kg
Voltage 220 V~ / 50 Hz
Brush motor power 1200 W
Water recovery motor power 400 W
Power cord length 18 m
Brush diameter 18 in
Accessories Scrubbing brush × 1; pad driver × 1

HY51C

Corded machine with 48 L solution and 52 L recovery tanks

HY51C Walk-behind Scrubber Dryer
HY51C

HY51C

For routes with mains power, HY51C gives your team a 48 L solution tank and 52 L recovery tank in a corded walk-behind format. It specifies a 220 V AC, 50 Hz supply, a 20 in brush and a 760 mm squeegee. This is a larger water-handling choice than HY2 for sites with a workable mains-power route. Plan filling, draining and cable movement around each zone, and use the listed brush diameter as its own dimension.

Watch HY51C on YouTube ↗
Complete product specifications
Specification HY51C
Packing dimensions 1370 × 650 × 1230 mm
Net weight 87 kg
Gross weight 124 kg
Maximum working productivity 2600 m²/h
Squeegee width 760 mm
Solution tank capacity 48 L
Recovery tank capacity 52 L
Scrubbing brush speed 200 rpm
Scrubbing brush pressure 22–36 kg
Voltage 220 V AC / 50 Hz
Brush motor power 550 W
Water recovery motor power 400 W
Brush diameter 20 in
Accessories Scrubbing brush × 1; pad driver × 1

HY50B3

24 V DC scrubber with a 510 mm working width

HY50B3 Walk-behind Scrubber Dryer
HY50B3

HY50B3

For battery-powered cleaning, HY50B3 has a 510 mm working width, a 52 L solution tank and a 45 L recovery tank. The 24 V DC battery system suits routes where your operator needs to move between work zones without routing a mains cable. Its recovery tank is smaller than its solution tank, so waste-water servicing needs its own place in the cleaning schedule. For your fleet comparison, also allow for the 760 mm squeegee at doorways and turns.

Watch HY50B3 on YouTube ↗
Complete product specifications
Specification HY50B3
Packing dimensions 1150 × 660 × 1210 mm
Net weight 130 kg
Gross weight 160 kg
Maximum working productivity 2900 m²/h
Squeegee width 760 mm
Working width 510 mm
Brush diameter 20 in
Solution tank capacity 52 L
Recovery tank capacity 45 L
Scrubbing brush speed 155 rpm
Scrubbing brush pressure 22–36 kg
Voltage 24 V DC
Brush motor power 550 W
Water recovery motor power 500 W
Battery operating time 2.5–3.5 h
Charging time 8 h
Battery 12 V DC × 2
Accessories Scrubbing brush × 1; pad driver × 1

HY51B

24 V DC model with 48 L solution and 52 L recovery tanks

HY51B Walk-behind Scrubber Dryer
HY51B

HY51B

In the battery walk-behind range, HY51B has a 48 L solution tank and a 52 L recovery tank, with a 24 V DC supply and two listed 12 V batteries. Choose this tank arrangement when you are comparing battery walk-behinds for a route split into several floor areas. Its 20 in brush and 760 mm squeegee describe different parts of the machine. Your planning should include charging access, filling points and the space available for the operator to turn.

Watch HY51B on YouTube ↗
Complete product specifications
Specification HY51B
Packing dimensions 1370 × 650 × 1230 mm
Net weight 188.5 kg
Gross weight 220 kg
Maximum working productivity 2800 m²/h
Squeegee width 760 mm
Brush diameter 20 in
Solution tank capacity 48 L
Recovery tank capacity 52 L
Scrubbing brush speed 155 rpm
Scrubbing brush pressure 22–36 kg
Voltage 24 V DC
Brush motor power 550 W
Water recovery motor power 400 W
Battery operating time 3–4 h
Charging time 8 h
Battery 12 V DC × 2
Accessories Scrubbing brush × 1; pad driver × 1

SA500

500 mm scrubbing path with 65 L / 45 L tanks

SA500 Walk-behind Scrubber Dryer
SA500

SA500

For tank-capacity planning, SA500 lists a 500 mm scrubbing width and a 65 L solution tank alongside a 45 L recovery tank. That difference matters when your team plans waste-water stops: the clean-water capacity cannot be treated as available recovery space. The machine has an 800 mm squeegee and a separately stated 100 Ah battery entry. Compare its tank arrangement with SA530, then assess access using the 1280 × 560 × 1120 mm product dimensions and the fitted squeegee.

Complete product specifications
Specification SA500
Product dimensions 1280 × 560 × 1120 mm
Net weight 145 kg
Gross weight 173 kg
Volume figure (unit not printed) 1
Solution tank capacity 65 L
Recovery tank capacity 45 L
Working productivity 2900 m²/h
Continuous working time 3–4 h
Battery charging time 6–8 h
Brush pressure 30–35 kg
Brush diameter 19 in
Scrubbing width 500 mm
Squeegee width 800 mm
Rear drive motor power /
Brush motor power 24 V / 550 W
Water recovery motor power 24 V / 400 W
Voltage 24 V / 100 A
Battery 100 Ah
Accessories Scrubbing brush × 1; pad driver × 1

SA530

530 mm scrubbing width with 60 L / 65 L tanks

SA530 Self-propelled Walk-behind Scrubber Dryer
SA530

SA530

The SA530 combines a 530 mm scrubbing width with a 60 L solution tank and a 65 L recovery tank. Its 800 mm squeegee extends beyond the cleaning path, so allow for that width at doorways and between cleaning zones.

Complete product specifications
Specification SA530
Product dimensions 1370 × 630 × 1080 mm
Net weight 145 kg
Gross weight 170 kg
Volume figure (unit not printed) 1
Solution tank capacity 60 L
Recovery tank capacity 65 L
Working productivity 3000 m²/h
Continuous working time 3–4 h
Battery charging time 6–8 h
Brush pressure 30–35 kg
Brush diameter 19 in
Scrubbing width 530 mm
Squeegee width 800 mm
Rear drive motor power /
Brush motor power 24 V / 550 W
Water recovery motor power 24 V / 400 W
Voltage 24 V / 100 A
Battery 100 Ah
Accessories Scrubbing brush × 1; pad driver × 1

SA530B

530 mm machine with 60 L solution and 65 L recovery tanks

SA530B Self-propelled Walk-behind Scrubber Dryer
SA530B

SA530B

In comparison with SA530, SA530B has the same listed 530 mm scrubbing width and 60 L solution / 65 L recovery capacities as SA530. It also specifies an 800 mm squeegee and a separate 100 Ah battery entry. The 1370 × 630 × 1080 mm product dimensions help you assess storage and access alongside the wider squeegee. Keep SA530B as its own line in your equipment and parts order so each service item can be matched to the fitted assembly.

Complete product specifications
Specification SA530B
Product dimensions 1370 × 630 × 1080 mm
Net weight 175 kg
Gross weight 175 kg
Volume figure (unit not printed) 1
Solution tank capacity 60 L
Recovery tank capacity 65 L
Working productivity 3000 m²/h
Continuous working time 3–4 h
Battery charging time 6–8 h
Brush pressure 30–35 kg
Brush diameter 19 in
Scrubbing width 530 mm
Squeegee width 800 mm
Rear drive motor power /
Brush motor power 24 V / 550 W
Water recovery motor power 24 V / 400 W
Voltage 24 V / 100 A
Battery 100 Ah
Accessories Scrubbing brush × 1; pad driver × 1

Ride-On Floor Scrubbers

The ride-on range includes 15 models with seated operator controls, single-brush and twin-brush formats, and a range of tank capacities. HY16 combines sweeping and scrubbing in one machine.

HY55B

550 mm ride-on cleaning path with 80 L / 70 L tanks

HY55B Ride-on Scrubber Dryer
HY55B

HY55B

For seated operation, HY55B gives your operator a seated driving position with a 550 mm working width and an 830 mm squeegee. Its 80 L solution tank and 70 L recovery tank need separate filling and emptying plans. This is the narrower working path among the HY55B and HY75 models, which makes it useful to compare when your route combines longer runs with restricted sections. Assess the complete machine and turning space before assigning it to the route.

Watch HY55B on YouTube ↗
Complete product specifications
Specification HY55B
Packing dimensions 1450 × 660 × 1240 mm
Net weight 212 kg
Gross weight 256 kg
Maximum working productivity 4850 m²/h
Squeegee width 830 mm
Working width 550 mm
Brush diameter 22 in
Water recovery motor power 500 W
Solution tank capacity 80 L
Recovery tank capacity 70 L
Scrubbing brush speed 155 rpm
Scrubbing brush pressure 30 kg
Voltage 24 V DC
Brush motor power 550 W
Travel motor power 300 W
Travel speed 0–5 km/h
Maximum climbing gradient 10°
Battery operating time 3–4 h
Charging time 8 h
Battery 12 V DC × 2
Accessories Scrubbing brush × 1

HY75B

750 mm twin-brush ride-on with a 980 mm squeegee

HY75B Ride-on Scrubber Dryer
HY75B

HY75B

Within the HY ride-on range, HY75B has a 750 mm working width, two 15 in brushes and 80 L solution / 100 L recovery tanks. Its 980 mm squeegee is narrower than the 1030 mm unit listed for HY75S, an important difference when your route has fixed access points. The seated operator controls travel while the machine scrubs and collects dirty water. Use the complete route and tank-service plan to choose between the two models, including the fitted tools and operating conditions.

Complete product specifications
Specification HY75B
Packing dimensions 1640 × 890 × 1457 mm
Net weight 377 kg
Gross weight 434 kg
Maximum working productivity 6000 m²/h
Squeegee width 980 mm
Working width 750 mm
Brush diameter 15 in × 2
Water recovery motor power 500 W
Solution tank capacity 80 L
Recovery tank capacity 100 L
Scrubbing brush speed 155 rpm
Scrubbing brush pressure 38 kg
Voltage 24 V DC
Brush motor power 550 W × 2
Travel motor power 400 W
Travel speed 0–5 km/h
Maximum climbing gradient 10°
Battery operating time 3–4 h
Charging time 8 h
Battery 6 V × 4
Accessories Scrubbing brush × 2; pad driver × 2

HY75S

750 mm twin-brush ride-on with a 1030 mm squeegee

HY75S Ride-on Scrubber Dryer
HY75S

HY75S

By comparison, HY75S shares the listed 750 mm working width and 80 L solution / 100 L recovery tanks of HY75B. Its squeegee is 1030 mm wide and its net weight is 331 kg. Include those differences in your access and handling assessment when choosing a ride-on for repeated floor routes. For your equipment order, the dedicated specification table brings the brush motor, travel motor and machine dimensions together with the water capacities.

Watch HY75S on YouTube ↗
Complete product specifications
Specification HY75S
Packing dimensions 1640 × 890 × 1457 mm
Net weight 331 kg
Gross weight 388 kg
Maximum working productivity 6000 m²/h
Squeegee width 1030 mm
Working width 750 mm
Brush diameter 15 in × 2
Water recovery motor power 500 W
Solution tank capacity 80 L
Recovery tank capacity 100 L
Scrubbing brush speed 155 rpm
Scrubbing brush pressure 38 kg
Voltage 24 V DC
Brush motor power 300 W × 2
Travel motor power 450 W
Travel speed 0–5 km/h
Maximum climbing gradient 10°
Battery operating time 3–4 h
Charging time 8 h
Battery 6 V × 4
Accessories Scrubbing brush × 2; pad driver × 2

CB660

660 mm twin-brush ride-on with 65 L / 70 L tanks

CB660 Twin-disc Ride-on Scrubber Dryer
CB660

CB660

For a twin-brush route, CB660 combines a 660 mm twin-brush scrubbing path with a 65 L solution tank and 70 L recovery tank. It provides a smaller tank arrangement than CB860 for routes where your water-service points are closer together. The 1050 mm squeegee extends beyond the cleaning path, so include it in the access assessment. Your operator drives from the seat through planned passes, with scrubbing and dirty-water recovery brought together in one machine.

Complete product specifications
Specification CB660
Product dimensions 1470 × 740 × 1190 mm
Net weight 230 kg
Gross weight 245 kg
Solution tank capacity 65 L
Recovery tank capacity 70 L
Working productivity 3000 m²/h
Continuous working time 2–3 h
Battery charging time 8 h
Battery 100 Ah / 120 Ah
Brush pressure 30 kg
Brush diameter 13 in
Scrubbing width 660 mm
Squeegee width 1050 mm
Drive motor power 500 W
Brush motor power 380 W × 2
Water recovery motor power 400W500W
Voltage DC 24 V
Accessories Scrubbing brush; pad driver

CB860

860 mm twin-brush ride-on with 95 L / 130 L tanks

CB860 High-capacity Twin-disc Ride-on Scrubber Dryer
CB860

CB860

For wider cleaning runs, CB860 expands the CB ride-on choice to an 860 mm scrubbing width with a 95 L solution tank and 130 L recovery tank. Compare it with CB660 when your site has wider runs and the route can accommodate a 1150 mm squeegee. Its product dimensions are 1710 × 840 × 1360 mm. These dimensions, the cleaning path and tank capacities help you plan access and service stops before building a bulk-order specification.

Complete product specifications
Specification CB860
Product dimensions 1710 × 840 × 1360 mm
Net weight 375 kg
Gross weight 400 kg
Solution tank capacity 95 L
Recovery tank capacity 130 L
Working productivity 4500 m²/h
Continuous working time 3–4 h
Battery charging time 8 h
Battery 6 V / 200 Ah × 4
Brush pressure 30 kg
Brush diameter 18 in / 440 mm
Scrubbing width 860 mm
Squeegee width 1150 mm
Drive motor power 600 W
Brush motor power 550 W × 2
Water recovery motor power 500 W
Voltage DC 24 V
Accessories Scrubbing brush; pad driver

SA600M

Single-brush ride-on with 600 mm scrubbing width

SA600M Single-disc Ride-on Scrubber Dryer
SA600M

SA600M

For a single-brush ride-on format, SA600M uses a single-brush ride-on format with a listed 600 mm scrubbing width and 85 L solution / 90 L recovery tanks. It gives your purchasing team a direct format comparison with the twin-brush SA660M while keeping the same stated tank capacities. Both list a 1050 mm squeegee, so a narrower cleaning path does not reduce that clearance requirement. Choose the format around your floor layout and the space available for seated operation.

Complete product specifications
Specification SA600M
Product dimensions 1560 × 1000 × 1190 mm
Net weight 230 kg
Gross weight 245 kg
Volume figure (unit not printed) 1.5
Solution tank capacity 85 L
Recovery tank capacity 90 L
Working productivity 6000 m²/h
Continuous working time 3–4 h
Battery charging time 6–8 h
Brush pressure 45 kg
Brush diameter 22 in / 700 mm
Scrubbing width 600 mm
Squeegee width 1050 mm
Rear drive motor power 500 W
Brush motor power 24 V / 500 W
Water recovery motor power 24 V / 400 W
Voltage 24 V / 100 A
Battery 100 Ah
Accessories Scrubbing brush × 1; pad driver × 1

SA660M

Twin-brush ride-on with a shared 660 mm specification

SA660M Twin-disc Ride-on Scrubber Dryer
SA660M

SA660M

In the twin-brush range, SA660M is a manually controlled ride-on with a 660 mm scrubbing width, 85 L solution tank and 90 L recovery tank. Compare it with SA600M's single-brush format when planning your ride-on range. Both specify a 1050 mm squeegee, so allow for that width at access points. Keep the exact model on the order, together with the controls, fittings and service parts required for its fitted assembly.

Complete product specifications
Specification SA660M
Product dimensions 1560 × 1000 × 1190 mm
Net weight 230 kg
Gross weight 245 kg
Volume figure (unit not printed) 1.5
Solution tank capacity 85 L
Recovery tank capacity 90 L
Working productivity 6000 m²/h
Continuous working time 3–4 h
Battery charging time 6–8 h
Brush pressure 45 kg
Brush diameter 13 in / 330 mm × 2
Scrubbing width 660 mm
Squeegee width 1050 mm
Rear drive motor power 500 W
Brush motor power 24 V / 380 W × 2
Water recovery motor power 24 V / 400 W
Voltage 24 V / 120 A
Battery 120 Ah
Accessories Scrubbing brush × 2; pad driver × 2

SA660

660 mm twin-brush ride-on with 85 L / 90 L tanks

SA660 Twin-disc Ride-on Scrubber Dryer
SA660

SA660

The SA660 combines a twin-brush cleaning head with a 660 mm scrubbing width, an 85 L solution tank and a 90 L recovery tank. This ride-on brings scrubbing and dirty-water recovery together for seated operation along planned cleaning routes.

Complete product specifications
Specification SA660
Product dimensions 1560 × 1000 × 1190 mm
Net weight 230 kg
Gross weight 245 kg
Volume figure (unit not printed) 1.5
Solution tank capacity 85 L
Recovery tank capacity 90 L
Working productivity 6000 m²/h
Continuous working time 3–4 h
Battery charging time 6–8 h
Brush pressure 45 kg
Brush diameter 13 in / 330 mm × 2
Scrubbing width 660 mm
Squeegee width 1050 mm
Rear drive motor power 500 W
Brush motor power 24 V / 380 W × 2
Water recovery motor power 24 V / 400 W
Voltage 24 V / 120 A
Battery 120 Ah
Accessories Scrubbing brush × 2; pad driver × 2

SA860

860 mm twin-brush ride-on with 140 L / 150 L tanks

SA860 Twin-disc Ride-on Scrubber Dryer
SA860

SA860

For larger water capacities, SA860 has an 860 mm scrubbing width and 140 L solution / 150 L recovery tanks. Those capacities distinguish it from the 85 L / 90 L SA660 arrangement for routes where your team needs more water between service points. The squeegee is 1150 mm wide and product dimensions are 1740 × 870 × 1380 mm. Include both in the route assessment, together with turning room and the facility's procedures for moving and servicing the machine.

Complete product specifications
Specification SA860
Product dimensions 1740 × 870 × 1380 mm
Net weight 375 kg
Gross weight 400 kg
Volume figure (unit not printed) 2.6
Solution tank capacity 140 L
Recovery tank capacity 150 L
Working productivity 8500 m²/h
Continuous working time 3–4 h
Battery charging time 6–8 h
Brush pressure 30 kg
Brush diameter 17 in / 440 mm × 2
Scrubbing width 860 mm
Squeegee width 1150 mm
Rear drive motor power 600 W
Brush motor power 24 V / 550 W × 2
Water recovery motor power 24 V / 400 W
Voltage 24 V / 225 A
Battery 225 Ah
Accessories Scrubbing brush × 2; pad driver × 2

HY12

Twin-brush ride-on with 145 L / 150 L tanks

HY12 Twin-disc Ride-on Scrubber Dryer
HY12

HY12

In the large-tank range, HY12 combines two brush discs with a 145 L solution tank and 150 L recovery tank in a 36 V DC ride-on. It is a large-tank option for your longer floor routes, provided the building can accommodate its 1840 × 1106 × 1578 mm product dimensions. Compare its layout and water-handling needs with the available service area. The listed 715 kg net weight also belongs in the facility's handling and access assessment.

Watch HY12 on YouTube ↗
Complete product specifications
Specification HY12
Product dimensions 1840 × 1106 × 1578 mm
Net weight 715 kg
Solution tank capacity 145 L
Recovery tank capacity 150 L
Working productivity 8500 m²/h
System power supply 6 V DC × 6 (36 V DC)
Brush discs 2 × 17 in
Scrubbing brush 17 in / 432 mm
Squeegee width 1067 mm
Brush motor power 2 × 480 W
Water recovery motor power 560 W
Travel motor power 650 W
Accessories Scrubbing brush × 2; pad driver × 2

HY16

Combined sweeping and scrubbing with 240 L / 250 L tanks

HY16 Ride-on Sweeper Scrubber
HY16

HY16

For combined sweeping and scrubbing, HY16 combines sweeping, scrubbing and dirty-water collection in a ride-on format. Its 240 L solution tank and 250 L recovery tank make it a separate choice for routes with both loose debris and attached soil. Your operating plan needs to handle dry waste and recovered liquid as separate service tasks. With product dimensions of 2120 × 1420 × 1673 mm and a listed 920 kg net weight, access and handling require attention before it joins your fleet.

Watch HY16 on YouTube ↗
Complete product specifications
Specification HY16
Product dimensions 2120 × 1420 × 1673 mm
Net weight 920 kg
Solution tank capacity 240 L
Recovery tank capacity 250 L
Working productivity 10000 m²/h
System power supply 6 V DC × 6 (36 V DC)
Brush diameter 2 × 878 mm
Scrubbing brush 13 in / 330 mm
Squeegee width 1067 mm
Brush motor power 2 × 750 W
Water recovery motor power 2 × 560 W
Travel motor power 1000 W

HY600

550 mm cleaning path · 80 L solution tank

HY600 Ride-on Floor Scrubber - Small Series
HY600

HY600

HY600 is a ride-on floor scrubber with a single 22 in brush and an approximately 550 mm cleaning path. Its solution and recovery tanks hold 80 L and 85 L respectively. The squeegee width is 900 mm.

Product specifications
Specification HY600
Working productivity 4850 m²/h
Solution tank capacity 80 L
Recovery tank capacity 85 L
Operating time 2-3 hours
Cleaning path and brush arrangement Approx. 550 mm Single 22 in Brush
Squeegee width 900 mm
Packing dimensions 1560*1000*1190

HY65B

650 mm cleaning path · 80 L solution tank

HY65B Ride-on Floor Scrubber - Small Series
HY65B

HY65B

HY65B is a ride-on floor scrubber with dual 13 in brushes and an approximately 650 mm cleaning path. Its solution and recovery tanks hold 80 L and 100 L respectively. The squeegee width is 850 mm.

Product specifications
Specification HY65B
Working productivity 3250 m²/h
Solution tank capacity 80 L
Recovery tank capacity 100 L
Operating time 4-4.5 hours
Cleaning path and brush arrangement Approx. 650 mm Dual 13 in Brushes
Squeegee width 850 mm
Packing dimensions 1640*790*1457

HY85B

850 mm cleaning path · 130 L solution tank

HY85B Ride-on Floor Scrubber - Medium Series
HY85B

HY85B

HY85B is a ride-on floor scrubber with dual 17 in brushes and an approximately 850 mm cleaning path. Its solution and recovery tanks hold 130 L and 125 L respectively. The squeegee width is 1150 mm.

Product specifications
Specification HY85B
Working productivity 5100 m²/h
Solution tank capacity 130 L
Recovery tank capacity 125 L
Operating time 4-4.5 hours
Cleaning path and brush arrangement Approx. 850 mm Dual 17 in Brushes
Squeegee width 1150 mm
Packing dimensions 1760*990*1472

HY860

860 mm cleaning path · 95 L solution tank

HY860 Ride-on Floor Scrubber - Large Series
HY860

HY860

HY860 is a ride-on floor scrubber with dual 17 in brushes and an approximately 860 mm cleaning path. Its solution and recovery tanks hold 95 L and 130 L respectively. The squeegee width is 1150 mm.

Product specifications
Specification HY860
Working productivity 8500 m²/h
Solution tank capacity 95 L
Recovery tank capacity 130 L
Operating time 3-4.5 hours
Cleaning path and brush arrangement Approx. 860 mm Dual 17 in Brushes
Squeegee width 1150 mm
Packing dimensions 1740*870*1380

Continue with the product range, documents and supply information.

View supply overview →
Buying decisions

The differences that affect your choice

Choose the format first, then compare the differences that change your route or order. A wider head and larger tank are useful only where the machine can work, turn and reach its service points.

Local cleaning or a full route

HYM3 has a 280 mm working width and 6 L solution tank; HYM5 has a 350 mm width and 13 L tank. A walk-behind such as HY50B3 moves the comparison to 510 mm and 52 L. Use the smaller formats for local tasks and assess larger machines for longer connected sections.

Power access along the route

HY2, HY45C, HY45C-2, HY46C and HY51C specify mains power, while HYM models, HY50B3 and HY51B have battery entries. Plan outlets and cable routes for corded work, or charging between battery-powered tasks. Include the required electrical version and destination supply in your order.

Ride-on cleaning width and clearance

HY55B lists a 550 mm working width with an 830 mm squeegee. HY75B increases the working width to 750 mm with a 980 mm squeegee. CB860 and SA860 list 860 mm scrubbing widths and 1150 mm squeegees. Include the full body and turning space in the access check.

Water stops at the same cleaning width

CB660 has 65 L solution and 70 L recovery tanks, while SA660 and SA660M share 85 L / 90 L capacities at the same 660 mm scrubbing width. At 860 mm, compare CB860 at 95 L / 130 L with SA860 at 140 L / 150 L. Use both capacities when planning filling and draining, rather than assuming a fixed time saving.

Recovery capacity can be the limiting tank

HY50B3 has 52 L solution and 45 L recovery tanks, SA500 has 65 L / 45 L, and HY55B has 80 L / 70 L. Your operator must monitor recovered water independently instead of assuming that every full solution tank can be collected in one recovery fill.

Sweeping as part of the cleaning task

HY16 adds sweeping to scrubbing and dirty-water collection, so assess it for routes with loose debris as well as attached soil. Plan dry-waste and recovered-water handling separately. Before using the other models, remove debris unsuitable for their scrubbing and recovery tools.

For a dedicated operator-guided range, see our walk-behind floor scrubbers. For dry pre-cleaning around fixtures, compare our commercial dry vacuums.

How the machine works

Key Components and Cleaning Workflow

Understand the cleaning head, water recovery, tanks and controls before planning a cleaning route. These four component groups explain the machine layout; the operating guide below covers preparation, cleaning and shutdown. Follow your model's instructions for its controls and service procedures.

A

Cleaning head and floor tools

The brush or compatible pad loosens soil as cleaning solution wets the floor. Match the tool, detergent and cleaning action to the surface finish and soil, then test a small area. Use the cleaning-head width to plan each pass.

B

Squeegee and water recovery

The squeegee gathers used solution, and the recovery system carries it to the recovery tank. Blade condition, hose connections and turns affect water pickup. Allow for the squeegee width when planning access: it may be wider than the cleaning path or machine body.

C

Solution and recovery tanks

The solution tank holds clean solution; the recovery tank collects used solution. Plan refilling and emptying around both capacities and their separate service points. For SA660, include its dual filling ports and level markings in the filling checks.

D

Controls and machine handling

A walk-behind is guided from the handle; a ride-on is driven from the seat. Plan the route around the controls, operator visibility and turning space. Follow the model's control sequence, including HY16's combined sweeping and scrubbing functions.

HY75B and HY75S ride-on floor scrubbers. Use each model's supplied instructions to identify its fitted cleaning head, squeegee, recovery system and controls.

From preparation to shutdown

  1. Prepare the floor and route. Remove oversized debris, separate pedestrians from the work area and check that the surface tolerates wet cleaning. Test a compatible brush or pad with low-foaming detergent on a small area.
  2. Prepare the machine for its format. For HYM compact machines, plan short sections, identify filling and draining points, and check the fitted cleaning and recovery parts with power isolated. For walk-behinds, check the cable route or available battery charge before filling. Follow the model's preparation instructions.
  3. Test the controls and start cleaning. For ride-ons, inspect steering and braking, adjust the operating position and make a low-speed test. For walk-behinds, use the model's control sequence on a small test section, then guide steady, overlapping passes and slow at turns.
  4. Monitor the cleaning pass. Follow the planned route, check water pickup and stop to refill or drain as needed. For HY16, also monitor the separate dry-waste collection during sweeping and scrubbing.
  5. Shut down and clean. Stop the cleaning functions, park securely and isolate power. Drain at the approved service point and clean the tanks and fitted tools. Keep floor warnings in place until the area is safe to reopen.
Operation demonstration

See the HY12 ride-on scrubber in operation

Watch the HY12 from brush and squeegee fitting to controls, hard-floor cleaning and tank draining. The demonstration gives a closer view of this large ride-on format within the floor scrubber range.

From cleaning-head setup to water recovery

The twin-brush deck scrubs the floor while the rear squeegee collects dirty water. Controls, filling and drain points are shown to explain the working routine before and after cleaning.

Watch on YouTube ↗
View HY12 specifications →

HY51B walk-behind floor scrubber

See the HY51B from preparation and controls to floor cleaning and care after use.

Watch on YouTube ↗
View HY51B specifications →
Use and care

Keep your floor scrubber ready for the next job

After each job, clean the tanks and fitted tools. Follow your model's instructions for power isolation, routine checks and safe operation.

Routine care

  • After each shift, empty recovered water and clean the tanks, cleaning tools and fitted recovery parts. On compact machines, inspect the fitted solution and recovery paths for blockages and clean them as instructed.
  • On walk-behinds, inspect the brush or pad and squeegee for wear. Check recovery hoses and connections if streaks or reduced pickup appear; isolate power before clearing obstructions.
  • On ride-ons, include steering and braking checks in the operating routine and park securely before servicing. HY16's dry-waste collection and dirty-water systems need separate emptying and cleaning.
  • Maintain batteries with the matched charger and the battery maker's instructions. Keep water jets away from electrical parts, and have damaged cables or electrical faults repaired by qualified personnel.

Application limits

  • Use these machines on hard floors that tolerate the selected wet-cleaning process. Unsealed wood, moisture-sensitive joints and specialist coatings need a separate surface assessment; a floor scrubber is not a universal carpet-cleaning machine.
  • Keep people clear of the route and moving cleaning tools. Follow the specific machine's slope, load and operating limits; a listed maximum gradient is not permission to clean every wet ramp.
  • Use compatible low-foaming chemicals and do not collect flammable liquids or hazardous dust. Wet scrubbing and recovery are cleaning processes, not disinfection. Keep floor warnings in place until the route is safe for foot traffic.

Need help identifying a service part?

Send the machine model and part identification so the requested replacement can be checked against the fitted assembly.

Tools and parts

Equip the scrubber for your floor finish

Choose brushes, pads and recovery parts for the actual machine and cleaning task. Your quotation separates the supplied set from extra tools and replacement stock.

Brushes and pad drivers

List the brushes and pad drivers supplied with each machine in your quotation, together with their quantities. Keep any extra sets separate so your team can distinguish the initial package from replacement stock.

Squeegee blades and recovery parts

Order blades, hoses and seals by the exact model and fitted assembly, because compatibility depends on the actual part. Include its identification when building your distributor stock list, even when two machines share tank capacities.

Pads and cleaning chemicals

Choose pads or brushes for the floor finish and actual tool holder, then test the cleaning process on a small area. Use low-foaming detergent compatible with both the machine and surface; check the coating requirements as well as pad colour and brush size.

Batteries, chargers and HY16 sweeping parts

Match the charger to the actual battery type and electrical configuration before use or replacement. For HY16, specify sweeping and collection parts separately from scrubbing tools, while keeping every requested item tied to the exact model.

Planning tools with your machines?

Include each model, floor finish and requested service item in the same enquiry so the quotation can show separate machine and parts lines.

Order planning

Prepare a commercial floor scrubber quotation

Start with your cleaning routes and model quantities. Then add power, parts and destination details so the offer covers the equipment your business needs.

Models and quantities

For a facility, describe the floor layout, access limits and cleaning schedule. If you are building a distributor range, list the compact, walk-behind and ride-on roles with a quantity for each model.

Tools and service stock

List brushes, pad drivers, blades and other requested items against the exact model. Keep extra sets separate from the supplied machine package so purchasing and maintenance teams can identify each order line.

Power and destination

Send the destination and electrical requirements with your quantities. Include any packing requirements as well, while keeping MOQ and lead time specific to the written offer for that order.

Ready to price your shortlist?

Send your model quantities and destination. If you are still comparing, describe the floor areas and routes you want to equip.

Supply planning for your shortlist

Turn your model shortlist into a supply plan

CLEVO is a commercial cleaning-equipment manufacturer and supplier for distributors and business cleaning teams. Build your order around the jobs your customers need to cover: compact machines for local tasks, walk-behinds for divided routes and ride-ons for larger connected areas. Keep machine configurations and requested service parts itemised so your purchasing, receiving and maintenance teams work from the same order details.

For manufacturer and purchasing information, visit our floor scrubber supply page.

For importers & distributors

Build the equipment mix

For a facility order, describe the floor layouts, access limits and cleaning schedule. For a distributor range, list the compact, walk-behind and ride-on roles you want to cover, with a target quantity for each model.

For your purchasing team

Specify tools and service stock

Include floor types and the brushes, pad drivers, blades or other service items to price. Separate the supplied machine package from additional items, and identify the model on every parts line.

For your purchasing team

Price the wholesale order

Send the destination and electrical requirements with your quantities so the offer can identify the supplied configuration. Your written quotation sets out packing, MOQ and lead time for that order, together with machine and spare-parts pricing.

Order and service support

Keep machine and supply details together

Use the same model identification for purchasing, receiving and maintenance. Clear order records help your team keep the machine configuration and requested parts together.

Model-specific service items

Identify the machine and fitted assembly when requesting brushes, blades, hoses or seals. Include part identification as well, so the service-stock list remains tied to the equipment you supply or operate.

Electrical requirements

Include the destination supply and requested electrical version in your enquiry. For battery machines, check the actual battery type and matching charger together before operating or replacing electrical items.

Packing and delivery details

Use packing dimensions for shipment planning, while checking operating access with actual machine measurements. Send the destination and quantities so the written quotation can set out packing and the order's lead time.

Have a model or order question?

Share the exact model and the supply or service details you need to discuss, together with any relevant part identification.

Need documents for your sourcing review?

View supply documents →
Application planning

Match commercial floor scrubbers to your sites

Start with water-compatible hard floors, access space and filling or draining points. Then choose a machine format for each zone, rather than assuming one size fits the whole site.

Application photograph not yet available

Plan around the floor and route

Use HYM compact machines for local sections, a walk-behind for connected zones, or a ride-on where seated operation and safe turns fit the route. Check surface compatibility and the selected machine's operating limits before work.

B2B buying questions

Commercial floor scrubber buying questions

Answers for your model shortlist, operation and purchasing plan.

Can one commercial floor scrubber cover several types of site?

It can cover several routes when the floor process, access and service arrangements fit the machine. A mixed site often benefits from a compact unit for local work and a larger machine for connected floor areas. Start with the narrowest access points and the surface requirements, then compare tank size and power supply.

Does the stated productivity tell me how long a building will take?

No. Productivity figures are equipment ratings, while building time also includes obstacles, turns, overlapping passes, water servicing and preparation. Before using a figure in a staffing or contract plan, measure a representative route with the intended tool and chemical.

Can I use the working width to judge doorway access?

Working width describes the cleaning path. The squeegee and body may be wider, and turning needs additional space. For example, HY55B lists a 550 mm working width and an 830 mm squeegee. Packing dimensions describe shipping size and cannot replace actual machine-clearance measurements.

Are battery operating times guaranteed for every shift?

No. Actual operating time varies with battery condition, floor load and the way the machine is used. Allow for these conditions when planning the shift, then use the actual battery and matched charger for charging. Check capacity and operating conditions as well as voltage when assessing runtime.

Does automatic mode mean the machine cleans without an operator?

No. An operator guides the compact and walk-behind machines, while a seated operator drives the ride-ons. On CB660 and CB860, automatic/manual labels refer to machine controls, not autonomous navigation.

Do all models sweep loose debris before scrubbing?

HY16 is identified as a combined sweeper-scrubber. The other machines on this page are presented for scrubbing and dirty-water recovery, so prepare their routes by removing oversized debris and material unsuitable for the fitted tools. HY16 also needs its dry waste and recovered liquid handled separately.

Are brushes, pad drivers and chargers included in the machine price?

The supplied package depends on the selected model and configuration. Your quotation identifies the included tools, battery and charger, while extra service items appear separately. Order accessories by the exact model and fitted assembly so the requested parts can be checked for compatibility.

Can I combine compact, walk-behind and ride-on models in a quotation?

Yes. Send quantities for each model and your destination to request a mixed-model offer. Include floor types, electrical supply and service parts as well, so the written quotation can set out the package, MOQ, packing and lead time for that order.

What helps a distributor choose an initial scrubber range?

Describe your customers' jobs and sites, then compare a compact model for local cleaning, a walk-behind for connected zones and a ride-on where access allows. Price model-specific brushes, recovery parts and electrical packages alongside the machines, so your service stock matches the equipment you supply.

Can I compare models before requesting a quotation?

Yes. Start with a suggested group, then select two to four models to compare their specifications. Each model links to its complete table, so you can review the details before sending your quantities and destination for a quotation.

Product catalogue · selection advice · bulk pricing

Request commercial floor scrubber bulk pricing

Get a quotation for the scrubber models and service items your business needs. Send your model quantities or describe the routes you want to equip so the offer can address your floor conditions, access and power supply.

Tell us what you need to source

  1. Floor types, route layout and access limits
  2. Selected models and quantities
  3. Electrical supply and requested tools or service parts
  4. Delivery destination