CLEVO Logo CLEVO
Cleaning tools · CLEVO

Window Squeegees and Washers Supplier

Build a window-cleaning set around the way your team washes and clears each pane. Choose fixed or swivel window squeegees, washer T-bars, complete washers and two-in-one tools. Compare 25–45 cm squeegee widths, 35–45 cm washer formats and the related replacement items before preparing a wholesale order.

Compare Models
Stainless steel window squeegee C-066 / C-067 / C-068 / C-069
Window squeegeesStainless steel window squeegee family; select the required reference and size.
Window washer assembly C-070 / C-071 / C-072
Window washersWindow washer assembly family; select the required reference and size.
Start with your task

Choose the format around the cleaning task

Compare washing and wiping stages, head width, fixed or swivel movement and complete-tool versus component supply.

View all cleaning tools

Separate washing from wiping

A window washer carries the cleaning solution across the pane; a window squeegee removes the remaining liquid. The T-bar is the support for a sleeve and is not a complete washer by itself. Choose separate tools where you want to select each stage independently, or compare the C-077 two-in-one format where both working faces share a handle.

Match width to the glazing

The four-width squeegee ranges run from 25 to 45 cm, while the washer and T-bar families offer 35, 40 and 45 cm versions. Wider tools suit a broad uninterrupted pane; smaller widths are easier to position between frame members and close to fittings. Consider the narrowest part of the working area as well as the overall window size.

Choose the head movement

Fixed heads keep a consistent relationship between the grip and working edge. C-071 swivel T-bars and C-061D–064D squeegees offer 180-degree movement to change that relationship. Compare the required angle at edges and the intended handle or pole connection before choosing the swivel format.

Model comparison

Compare the options on your shortlist

Choose two to four of the 10 product entries or families. Compare matching fields, then open a model for its full product information.

Choose a starting group

Select 2–4 models. Open a model name in the table to view its full specifications.

Product references
Selected specifications
Specification Standard window washer T-bar C-074A / C-075A / C-076A C-074A / C-075A / C-076A Deluxe window washer T-bar C-070-1 / C-070-2 / C-070-3 C-070-1 / C-070-2 / C-070-3 Swivel window washer T-bar C-071-1 / C-071-2 / C-071-3 C-071-1 / C-071-2 / C-071-3
Product specification
Type Standard window washer T-bar Deluxe window washer T-bar Swivel window washer T-bar
Size / variants 35 / 40 / 45 cm 35 / 40 / 45 cm 35 / 40 / 45 cm; 180° swivel
Colour / finish Blue / yellow / green / black Black shown Black shown
Product Information
Product range

View Full Product Information

Choose a product family or search a model to explore its design, dimensions, colours and packing. Each item has its own enquiry button.

C-074A / C-075A / C-076A

Standard window washer T-bar

Standard window washer T-bar C-074A / C-075A / C-076A
Standard window washer T-bar family; select the required reference and size.

Standard window washer T-bar

The fixed T-bar supports a washer sleeve across the glass. The three lengths offer a choice between narrower panes and broader glazing; match the sleeve length to the selected bar. The available references are C-074A / C-075A / C-076A.

Product information

Type Standard window washer T-bar
Size / variants 35 / 40 / 45 cm
Material ---
Colour / finish Blue / yellow / green / black
Carton dimensions ---
Packing 10 pcs/bag
Supply format T-bar; sleeve ordered separately

C-070-1 / C-070-2 / C-070-3

Deluxe window washer T-bar

Deluxe window washer T-bar C-070-1 / C-070-2 / C-070-3
Deluxe window washer T-bar family; select the required reference and size.

Deluxe window washer T-bar

This T-bar range has a shaped grip and a fixed crossbar. Compare the bar length with the width of the pane and the space around window furniture before choosing a size. The available references are C-070-1 / C-070-2 / C-070-3.

Product information

Type Deluxe window washer T-bar
Size / variants 35 / 40 / 45 cm
Material ---
Colour / finish Black shown
Carton dimensions ---
Packing 10 pcs/bag
Supply format T-bar; sleeve ordered separately

C-071-1 / C-071-2 / C-071-3

Swivel window washer T-bar

Swivel window washer T-bar C-071-1 / C-071-2 / C-071-3
Swivel window washer T-bar family; select the required reference and size.

Swivel window washer T-bar

The swivel joint changes the angle between the handle and washer bar. It offers an alternative working position around frames and edges, while the chosen sleeve determines the washing surface. The available references are C-071-1 / C-071-2 / C-071-3.

Product information

Type Swivel window washer T-bar
Size / variants 35 / 40 / 45 cm; 180° swivel
Material ---
Colour / finish Black shown
Carton dimensions ---
Packing 10 pcs/bag
Supply format T-bar; sleeve ordered separately

C-077-1 / C-077-2 / C-077-3

Two-in-one window washer and squeegee

Two-in-one window washer and squeegee C-077-1 / C-077-2 / C-077-3
Two-in-one window washer and squeegee family; select the required reference and size.

Two-in-one window washer and squeegee

A washer and wiping edge share one handle in this combined tool. It keeps both stages of window cleaning together; choose the width for the glazing and include replacement consumables in the purchasing plan. The available references are C-077-1 / C-077-2 / C-077-3.

Product information

Type Two-in-one window washer and squeegee
Size / variants 35 / 40 / 45 cm
Material ---
Colour / finish Yellow handle; light-coloured sleeve
Carton dimensions ---
Packing ---
Supply format Combined washer and squeegee

C-066 / C-067 / C-068 / C-069

Stainless steel window squeegee

Stainless steel window squeegee C-066 / C-067 / C-068 / C-069
Stainless steel window squeegee family; select the required reference and size.

Stainless steel window squeegee

A metal channel supports the wiping rubber along the working edge. This fixed-head range gives a choice of four widths for different panes. The available references are C-066 / C-067 / C-068 / C-069.

Product information

Type Stainless steel window squeegee
Size / variants 25 / 35 / 40 / 45 cm
Material Stainless steel
Colour / finish Black / blue handles
Carton dimensions C-066–068: 42.5 × 36 × 20 cm; C-069: 47 × 36 × 20 cm
Packing 100 pcs/carton
Supply format Hand tool

C-061 / C-062 / C-063 / C-064

Plastic and aluminium window squeegee

Plastic and aluminium window squeegee C-061 / C-062 / C-063 / C-064
Plastic and aluminium window squeegee family; select the required reference and size.

Plastic and aluminium window squeegee

A plastic handle and aluminium channel form this fixed-head squeegee. The screw fastening is a visible design difference from the spring-style range. The available references are C-061 / C-062 / C-063 / C-064.

Product information

Type Plastic and aluminium window squeegee
Size / variants 25 / 35 / 40 / 45 cm
Material Plastic and aluminium
Colour / finish Black / blue handles
Carton dimensions 50 × 36 × 24 cm
Packing 100 pcs/carton
Supply format Hand tool

C-066B / C-067B / C-068B / C-069B

Spring-type stainless steel window squeegee

Spring-type stainless steel window squeegee C-066B / C-067B / C-068B / C-069B
Spring-type stainless steel window squeegee family; select the required reference and size.

Spring-type stainless steel window squeegee

The spring-type fastening distinguishes this range from the other channel arrangements. Include the full B-suffix reference when selecting a replacement tool. The available references are C-066B / C-067B / C-068B / C-069B.

Product information

Type Spring-type stainless steel window squeegee
Size / variants 25 / 35 / 40 / 45 cm
Material Stainless steel
Colour / finish Black / blue handles
Carton dimensions C-066B–068B: 42.5 × 36 × 20 cm; C-069B: 47 × 36 × 20 cm
Packing 100 pcs/carton
Supply format Hand tool

C-061D / C-062D / C-063D / C-064D

Swivel window squeegee

Swivel window squeegee C-061D / C-062D / C-063D / C-064D
Swivel window squeegee family; select the required reference and size.

Swivel window squeegee

The head swivels through 180 degrees to alter the working angle. Compare this layout with a fixed head for the shape and access of the window. The available references are C-061D / C-062D / C-063D / C-064D.

Product information

Type Swivel window squeegee
Size / variants 25 / 35 / 40 / 45 cm
Material Plastic handle
Colour / finish Black / blue handles
Carton dimensions C-061D–063D: 42.5 × 36 × 20 cm; C-064D: 47 × 36 × 20 cm
Packing 50 pcs/carton
Supply format Hand tool

C-070 / C-071 / C-072

Window washer assembly

Window washer assembly C-070 / C-071 / C-072
Window washer assembly family; select the required reference and size.

Window washer assembly

The sleeve holds cleaning solution against the pane while the T-bar supports it. Pair the working width with a suitable squeegee for the next stage, and identify whether the order is for the complete washer or a replacement sleeve. The available references are C-070 / C-071 / C-072.

Product information

Type Window washer assembly
Size / variants 35 / 40 / 45 cm
Material ---
Colour / finish Light-coloured sleeve; black / blue handles shown
Carton dimensions 35 cm: 76 × 42 × 25 cm; 40 cm: 78 × 48 × 24 cm; 45 cm: 80 × 54 × 24 cm
Packing 50 sets/carton
Supply format Washer with sleeve

C-070D / C-071D / C-072D

Window washer assembly

Window washer assembly C-070D / C-071D / C-072D
Window washer assembly family; select the required reference and size.

Window washer assembly

The sleeve holds cleaning solution against the pane while the T-bar supports it. Pair the working width with a suitable squeegee for the next stage, and identify whether the order is for the complete washer or a replacement sleeve. The available references are C-070D / C-071D / C-072D.

Product information

Type Window washer assembly
Size / variants 35 / 40 / 45 cm
Material ---
Colour / finish Light-coloured sleeve; black / blue handles shown
Carton dimensions 35 cm: 76 × 42 × 25 cm; 40 cm: 78 × 48 × 24 cm; 45 cm: 80 × 54 × 24 cm
Packing 50 sets/carton
Supply format Washer with sleeve
Buying decisions

Details that change the working setup

Compare the construction, dimensions and supply form of the window cleaning tools you are considering.

Channel material and retention

The range includes stainless steel squeegees and a plastic-handle, aluminium-channel family. The C-066B–069B models have a spring-type arrangement, while the C-061–064 family uses screw fastening. These are practical differences when identifying a tool and its replacement parts; a similar width does not establish that a channel or rubber will fit another design.

Complete washers and replacement sleeves

C-070–072 and C-070D–072D are complete washer references in this page. Replacement sleeves belong in the accessories order as sleeve-only items. Specify the length and supplied form together, particularly where a D-series reference appears on both a complete tool and a consumable.

Packing for a mixed assortment

The fixed and spring-type metal squeegee ranges are packed 100 per carton, while the swivel plastic squeegees are packed 50 per carton. T-bars are packed 10 per bag and complete washers 50 sets per carton. Keep these units with each line when comparing a mixed purchase; the count for one family does not apply to every tool.

Need help choosing the right configuration?

Compare washing and wiping stages, head width, fixed or swivel movement and complete-tool versus component supply.

Use guide

Put the selected tools into a practical routine

Plan the washing and liquid-removal stages for the glazing, frames and access conditions.

Prepare the pane and tools

Identify the glazing and its surface requirements, then choose a suitable cleaning solution and a clean washer sleeve. Remove loose grit before moving the tool across the surface. Keep the working area clear so drips and equipment do not obstruct people using the space.

Wash and clear in a controlled sequence

Wet the pane with the washer, then use the squeegee to draw away the liquid in controlled passes. Clear the wiping edge as needed so collected debris is not carried back over the glass. For a two-in-one tool, change working faces deliberately rather than dragging the unused face across the frame.

Work within a manageable reach

Choose a position from which the whole tool remains controlled. A swivel joint changes the working angle; it does not make every pole or elevated task suitable. Verify the pole connection and assess access before working above normal hand reach.

Planning tools for your cleaning routine?

Plan the washing and liquid-removal stages for the glazing, frames and access conditions.

Care and inspection

Protect the working surface and the tool

Check sleeve cleanliness, rubber condition, head security and the intended glass surface.

Keep the sleeve and rubber clean

Rinse away residue according to the cleaning product instructions and let components dry before storage. Inspect the sleeve for embedded debris and the rubber for nicks or a distorted edge. A clean contact surface matters more than keeping a worn item in service merely because it still attaches.

Inspect the connection and head

Check the channel, fasteners, handle and any swivel joint before use. Replace damaged or loose components with the correct form for the tool. Store channels and rubber edges where other equipment will not bend or crush them.

Have a care or replacement question?

Check sleeve cleanliness, rubber condition, head security and the intended glass surface.

Parts and related supplies

Plan the related parts and replenishment items

Include the required sleeves, wiping rubber and confirmed pole connections as separate order lines.

Replacement washer sleeves

Choose the correct length and fastening for the selected T-bar. C-074–076 white sleeves and D-series replacement sleeves are separate purchasing items; identify them as sleeve-only to distinguish them from complete washers.

Wiping rubber and channels

C-080 replacement rubber is offered as a 105 cm strip in the accessories range. Check its profile, retention and required cut length against the selected channel before including it. No universal channel or brand compatibility is implied.

Extension poles and tool storage

The C-044–057 pole range offers different lengths and section arrangements. Confirm the end fitting for the chosen head and the working conditions. A dedicated storage position keeps sleeves, channels and poles identifiable between tasks.

Complete your tools and spare-parts list

Include the required sleeves, wiping rubber and confirmed pole connections as separate order lines.

Ordering and delivery

Prepare an itemised purchase request

A complete specification makes the quotation and repeat order easier to identify.

Build the order around the working set

List the selected window cleaning tools references with their sizes, colours and quantities. Separate complete tools from replacement parts. This keeps the quoted scope clear where one photograph shows several sizes or where a head and handle can be purchased separately.

Plan replacements alongside new tools

Include the required sleeves, wiping rubber and confirmed pole connections as separate order lines. You can divide quantities between initial equipment and replenishment stock. Keeping the product code and selected configuration in your purchase record makes later orders easier to reproduce.

Review packing and supply terms

Include the destination and requested delivery date with your enquiry. The quotation should identify the agreed packing, quantity, lead time and delivery terms for your order. Where freight planning is needed, you can use the confirmed carton dimensions and weights to request a transport quotation.

OEM and ODM for your product range

We offer OEM and ODM support for window cleaning tools projects. Share the intended use, brand artwork, preferred colours, size requirements and packaging brief. For a new design, drawings and the working conditions help define the project. We can review the proposed specification, sample or tooling requirements and commercial scope with you before the project is agreed.

Ready to price the order?

Send the selected references, quantities and destination.

CLEVO supply range

Source a coordinated range for your business

Build a window cleaning tools order for facilities, cleaning contractors or distribution, with clear references and an agreed supply scope.

Standard window washer T-bar C-074A / C-075A / C-076A
Standard window washer T-bar family; select the required reference and size.
For purchasing teams and distributors

An assortment built around real tasks

Plan the washing and liquid-removal stages for the glazing, frames and access conditions. A distributor assortment can combine the formats customers use together, while a facility order can be divided by area or team. Compare washing and wiping stages, head width, fixed or swivel movement and complete-tool versus component supply.

Stainless steel window squeegee C-066 / C-067 / C-068 / C-069
Stainless steel window squeegee family; select the required reference and size.
For purchasing teams and distributors

Clear identification from first order to refill

Include the required sleeves, wiping rubber and confirmed pole connections as separate order lines. Keep the full reference, size and supply form on the quotation and receiving list. This is especially useful when a family photograph shows several versions or a similar-looking component has a different connection.

Window washer assembly C-070D / C-071D / C-072D
Window washer assembly family; select the required reference and size.
For purchasing teams and distributors

Standard products and custom projects

Our window cleaning tools range gives buyers a starting point for standard-product enquiries and OEM or ODM discussions. Colour, branding, packaging and design requests can be reviewed against the selected product and project scope. The agreed quotation defines what is included and which details require a sample.

Product and order support

Make support requests specific

Use the product reference and the affected detail to explain a replacement, use or order question.

Product selection and fit

Check sleeve cleanliness, rubber condition, head security and the intended glass surface. If a replacement needs to join an existing tool, a photograph of the connection and the full product reference help identify the requirement.

Receiving and replacement questions

Check the delivered reference, configuration and quantity against the agreed order. If an item needs attention, share the order number and clear photographs of the affected part so the question can be reviewed accurately.

Keep the order documents

Retain the model list, quantities and agreed supply terms. Include the order reference when raising a product or delivery question.

Have a product or order question?

Share the reference and the detail you need help with.

Application planning

Select by working area and access

Choose window cleaning tools for the working area, cleaning routine and access available at your site.

Shopfront and entrance glazing

Compare the pane width, mullions and door hardware when choosing a squeegee and washer pair. A smaller tool can remain useful alongside a broad head for narrow sections and detailed edges.

Facility window-cleaning teams

A set can include several working widths, spare sleeves and wiping rubber. Allocate the tool list to the actual glazing and access conditions rather than treating one large size as the answer to every window.

Distributor window-care ranges

Organise stock by washing, wiping and replacement components. Clear complete-tool and sleeve-only descriptions help customers build a coherent set and reorder the consumables they actually use.

Build a shortlist for your site

Share the working area, selected window cleaning tools and quantities.

B2B buying questions

Before you order

Answers about product choice, routine use and purchasing details.

What is the difference between a T-bar and a window washer?

A T-bar supports the cleaning sleeve. A complete window washer combines the bar and sleeve, while a replacement sleeve is supplied on its own. The order should state both the reference and the supplied form.

Which squeegee widths are available?

The C-066–069, C-061–064, C-066B–069B and C-061D–064D families offer 25, 35, 40 and 45 cm widths in reference order. Washer and T-bar families on this page offer 35, 40 and 45 cm versions.

Can the tools be used with any extension pole?

No universal connection is specified. Match the selected tool and pole by their end fitting and intended working arrangement before ordering them together.

Does a swivel head replace access planning?

No. Swivel models change the angle of the tool head. The working position, reach, pole connection and control of the tool still need to suit the task.

Can you support OEM or ODM orders?

Yes. We offer OEM and ODM support for window cleaning tools projects. Share the design, colour, branding and packaging requirements. The agreed scope, sample or tooling needs, order quantity and commercial terms are confirmed for the specific project.

How do I request a wholesale quotation?

Include the window cleaning tools references, selected sizes or colours, quantities and destination. List any required replacement parts separately. If the product has to fit existing equipment, include its reference and connection details so the enquiry describes a complete requirement.

Ready to confirm the purchasing details?

Send the references, quantities and any remaining window cleaning tools questions.

Product information · selection · bulk pricing

Request window squeegees and washers wholesale pricing

Get a product-based quotation for your business.

Choose your window cleaning tools references, sizes and quantities. You can include the working surfaces, preferred colours and any spare items so we can prepare a clear quotation for the complete requirement.

Tell us what you need to source

  1. Complete model or specification references
  2. Quantities and selected configurations
  3. Application and related supply requirements
  4. Delivery destination and requested schedule