CLEVO Logo CLEVO
Commercial carts · CLEVO

Two Shelf Utility Carts Supplier

Bring tools, containers and replenishment supplies along the route on a two-level working cart. C-017 provides a flat upper surface in a narrower body; C-018 uses a wider rimmed upper tray. Both are black, with an accessible lower shelf and a push handle. Compare their size and loading layout for your facility or distributor range, and discuss the configuration required for your order.

Compare Models
C-017 MULTI-USE FLAT TROLLEY
Flat upper surfaceTwo shelf cart with a flat upper surface.
C-018 MULTI-USE FLAT TROLLEY
Rimmed upper trayTwo shelf cart with a rimmed upper tray.
Start with your task

Flat upper surface or rimmed tray

Choose a 2 shelf utility cart around what you carry, how you reach it and the space available along the route.

View all commercial carts

A flat top for access from several sides

C-017 has an open, flat upper surface. This layout suits containers or working items that need to be reached from more than one side, with a lower shelf for additional supplies. Its overall dimensions are 106 × 49.5 × 93.5 cm. Check the usable top surface against the base of the item carried, and keep the load stable within the working area.

A rimmed tray to define the loading area

C-018 has a raised edge around its upper tray and an overall size of 114 × 62.5 × 99 cm. The rim creates a defined space for arranging several containers, while the lower shelf provides a second position for supplies. A rim helps organise the loading area; the items still need to be stable and appropriately secured for movement.

Black finish with two different footprints

Both models use a black body, making it straightforward to coordinate the cart with other back-of-house equipment. C-017 is 49.5 cm wide and C-018 is 62.5 cm wide. Consider that difference alongside doorway clearance, room to turn and the place where the cart will be parked. Overall size and usable shelf area answer different fit questions.

Model comparison

Compare the options on your shortlist

Compare both product configurations side by side, then open either model for its full product information.

Choose a starting group

Both models are selected. Open a model name in the table to view its full specifications.

Product references
Selected specifications
Specification C-017 MULTI-USE FLAT TROLLEY C-017 C-018 MULTI-USE FLAT TROLLEY C-018
Product specification
Configuration Two shelves; flat upper surface Two shelves; rimmed upper tray
Product dimensions 106 × 49.5 × 93.5 cm 114 × 62.5 × 99 cm
Carton dimensions 108 × 49.5 × 24 cm 116 × 63 × 21 cm
Product Information
Product range

View Full Product Information

Choose a product family or search a model to explore its design, dimensions, colours and packing. Each item has its own enquiry button.

C-017

Two shelf cart with a flat upper surface

C-017 MULTI-USE FLAT TROLLEY
Two shelf cart with a flat upper surface.

Two shelf cart with a flat upper surface

C-017 is a black two shelf cart with an open upper surface and a lower storage shelf. Its 49.5 cm overall width makes it the narrower option in this pair. The flat upper layout gives access from the sides, while the lower shelf provides a separate position for containers or supplies. Compare the complete 106 × 49.5 × 93.5 cm dimensions with the route and parking position. The carton measures 108 × 49.5 × 24 cm and contains one cart.

Product information

Configuration Two shelves; flat upper surface
Product dimensions 106 × 49.5 × 93.5 cm
Carton dimensions 108 × 49.5 × 24 cm
Packing 1 pc/carton
Colour Black
Construction ---
Load capacity ---

C-018

Two shelf cart with a rimmed upper tray

C-018 MULTI-USE FLAT TROLLEY
Two shelf cart with a rimmed upper tray.

Two shelf cart with a rimmed upper tray

C-018 combines a rimmed upper tray with an open lower shelf. It measures 114 × 62.5 × 99 cm overall, providing a wider format than C-017 for organising several containers on a route. The raised tray edge creates a defined loading area; the actual usable tray dimensions should be matched to the items you want to carry. Its black finish suits a coordinated back-of-house equipment range. Each carton contains one cart.

Product information

Configuration Two shelves; rimmed upper tray
Product dimensions 114 × 62.5 × 99 cm
Carton dimensions 116 × 63 × 21 cm
Packing 1 pc/carton
Colour Black
Construction ---
Load capacity ---
Buying decisions

Plan the two levels as a working arrangement

The upper surface and lower shelf serve different parts of the task. A useful selection considers access, stability and the way containers will return to storage.

Use the lower shelf for an organised load

The two shelf cart layout separates the upper working level from the lower storage position. Keeping stable, heavier items low can make the arrangement easier to manage. Leave room to lift containers out without catching the upper structure, and keep frequently used supplies at an accessible position. Include container height and base size in an enquiry when shelf clearance is critical.

Specify the load and floor conditions

A material handling trolley should be matched to the actual working load and route. You can share the load distribution, floor surface, thresholds and expected frequency of use when selecting the cart. For a custom project, those details help define the wheel arrangement and construction requirement. Keep the agreed load rating with the chosen order configuration.

Keep the working and shipping sizes separate

C-017 is packed in a 108 × 49.5 × 24 cm carton and C-018 in a 116 × 63 × 21 cm carton, one cart per carton. These measurements help with stockroom and shipment planning. Use the assembled product dimensions for route fit, and the carton dimensions for the order’s receiving and storage arrangements.

Use guide

Load and move the cart with a clear route

Keep the contents stable and accessible throughout the movement between stockroom and work area.

Organise before loading

Check that the cart is stable and that wheels and supports are in serviceable condition. Place items fully on their supporting surface, with heavier items low and the load distributed. Follow the agreed working-load limit for the supplied configuration.

Push with controlled movement

Keep the handle accessible and the forward view clear. Move at walking speed, allowing space around corners and doorways. Plan a suitable route for the wheel arrangement and avoid impacts against steps, edges or fixtures.

Unload and park

Remove the load in a stable sequence and park on a level surface clear of circulation routes. Return loose containers and tools to their intended positions so the cart is ready for the next task.

Care and inspection

Care for the next working shift

Keep the cart, its moving parts and any fitted containers clean and ready for regular use.

Wipe surfaces and clear debris

Remove carried items before cleaning the top and lower shelf. Use a compatible cleaning agent and avoid abrasive treatment that damages the surface. Clear loose material from the wheel area, and dry the cart before returning dry supplies to it.

Check the handle and moving parts

Inspect the handle, shelf supports and wheel fittings during routine checks. If a wheel binds or a support is damaged, stop using the cart until the issue is resolved. Share the model and fitting photographs when asking about replacement components.

Parts and related supplies

Containers and parts that suit the cart

The items placed on the shelves and any replacement fittings should be selected for the specific body and connection points.

Containers for the upper level

Choose containers whose bases sit fully on the working surface. For C-018, account for the space inside the raised rim. The overall cart dimensions should not be treated as usable tray dimensions.

Items for the lower shelf

Match container height and access to the space below the upper surface. A low, stable arrangement keeps the upper level accessible and helps staff identify each supply item.

Model-specific replacement parts

Wheel assemblies, handles and structural fittings should be identified by the full cart reference and their mounting details. Photos of the existing fitting are useful for a replacement enquiry.

Ordering and delivery

Build the order around the working setup

The model, configuration and order quantity provide the starting point. Accessories and project requirements can be set out separately.

Choose the loading layout

Specify C-017 for the flat upper surface or C-018 for the wider rimmed tray. You can include container dimensions and route clearance to help review the proposed fit.

Plan the order quantity

Both models are packed one per carton. Keep quantities against the complete model so the different assembled and carton dimensions remain clear in the quotation.

Review supply terms

The quotation can identify the configuration, packing and delivery terms for your destination. Any samples, replacement components or special requirements can be listed with the order.

OEM and ODM for your utility-cart project

We offer OEM and ODM support. Share your brand artwork, colour reference, desired platform layout, container sizes and target working load. For a new design, drawings and route conditions help define the development brief. The agreed design, materials, samples, tooling if needed, packing and commercial terms can be specified for the individual project.

Ready to price the order?

Send the selected references, quantities and destination.

CLEVO supply range

Wholesale supply and OEM and ODM projects

CLEVO supplies commercial carts for distributors and facility teams. We can review a standard model selection or a product project based on your own requirements.

C-017 MULTI-USE FLAT TROLLEY
Two shelf cart with a flat upper surface.
For purchasing teams and distributors

Two loading formats for commercial work

C-017 and C-018 give a choice between a narrower flat-top cart and a wider rimmed-tray cart. A distributor can present the two models by those concrete differences, while a facility can select them around its own containers and access routes.

C-017 MULTI-USE FLAT TROLLEY
Two shelf cart with a flat upper surface.
For purchasing teams and distributors

A clear specification for repeat purchases

The model code, black finish, body dimensions and packing identify the standard selection. Keeping the agreed loading requirement and any fitted items with that specification helps maintain a consistent arrangement across later orders.

C-018 MULTI-USE FLAT TROLLEY
Two shelf cart with a rimmed upper tray.
For purchasing teams and distributors

A brief for your own cart range

Our OEM and ODM service can review brand presentation and product requirements together. A useful brief describes what the cart will carry, the handling conditions, design expectations and packaging needs, allowing the proposal to address the intended operation.

Product and order support

Help with selection and replacement parts

The full model reference, photographs and the detail you need to resolve help us review the appropriate configuration.

Selection based on the carried items

Container size, total load and the narrowest route clearance are useful details when deciding between the two bodies. You can share a simple layout or photographs of the intended items.

Replacement fitting identification

Provide C-017 or C-018 and clear views of the wheel, handle or support concerned. Include mounting dimensions when a particular connection needs to match existing equipment.

Keep the order documents

Retain the model list, quantities and agreed supply terms. Include the order reference when raising a product or delivery question.

Have a product or order question?

Share the reference and the detail you need help with.

Application planning

Match the cart to the route

These are application planning examples for selecting equipment for your own operation.

Stockroom replenishment

Use separate levels for packaged stock and frequently handled items when moving between storage and working areas. Choose the body width for the tightest part of the route and leave access to the lower shelf.

Workshop and facility supplies

A tool utility cart can keep selected tools and small containers together during a service task. Match the working surface, load distribution and wheel requirements to the operation rather than selecting by body size alone.

Distributor assortments

The black two-level models provide a focused pair for commercial customers. The difference between the flat and rimmed upper surfaces makes the range easy to explain without treating them as interchangeable sizes.

B2B buying questions

Before placing your cart order

Answers to practical questions about choosing a model and specifying the order.

What is the main difference between C-017 and C-018?

C-017 has a flat upper surface and is 49.5 cm wide. C-018 has a rimmed upper tray and is 62.5 cm wide. Their complete body and carton dimensions also differ.

Are both models available in black?

Yes. The standard C-017 and C-018 bodies are black. You can share a colour reference for an OEM or ODM project.

Is the overall width the usable shelf width?

No. Overall dimensions describe the complete cart. Provide the dimensions of the container or equipment when usable shelf space and clearance are important.

How should I specify the working load?

Include the expected total load, how it will be distributed between levels and the route conditions. The load requirement can then be reviewed for the selected configuration.

How are the carts packed?

Each model is packed one cart per carton. C-017 carton dimensions are 108 × 49.5 × 24 cm; C-018 carton dimensions are 116 × 63 × 21 cm.

Can you support an OEM or ODM project?

Yes. We can review branding, colour, packaging and design requirements. Project-specific materials, samples, tooling and supply terms are agreed in the quotation.

Product information · selection · bulk pricing

Request two shelf utility carts wholesale pricing

Get a product-based quotation for your business.

Share C-017 or C-018, the quantity, the items and working load to be carried, and any colour, branding or packaging requirements.

Tell us what you need to source

  1. Complete model or specification references
  2. Quantities and selected configurations
  3. Application and related supply requirements
  4. Delivery destination and requested schedule