CLEVO Logo CLEVO
Guest room amenities · CLEVO

Umbrella Bag Dispensers Supplier

Offer a convenient umbrella bagging point before visitors walk further into the building. CLEVO D-001A and D-001B umbrella bag dispensers provide two freestanding formats for hotel, office and commercial entrances. Compare their footprints and top layouts, then pair the selected station with the right refill bags and clear user instructions.

Compare Models
D-001B Slim umbrella bag dispenser
Slim bodyD-001B · Slim umbrella bag dispenser
D-001A Wide umbrella bag dispenser
Wide bodyD-001A · Wide umbrella bag dispenser
Start with your task

Choose the bagging format for your entrance

Compare footprint, insertion layout and finish before planning the refill supply.

View all guest room amenities

A slim station for limited space

D-001B measures 34 × 25 × 77 cm and uses one top insertion position. Its smaller footprint is useful beside a reception point or entrance furniture where space is restricted. Leave room for a visitor to hold and move an umbrella, rather than fitting only the cabinet into the available gap.

A wider body with two insertion positions

D-001A measures 47 × 29 × 79 cm and has two top insertion positions. This gives a different station layout from D-001B. Choose it around the intended service arrangement, and match the refill bags and umbrella types to the selected unit before planning how visitors will use both positions.

A finish that suits the entrance

D-001B is shown with a silver body and red panel. D-001A has a black front with silver side trim and a visible umbrella graphic. These appearances offer different starting points for the reception area. Branding, colour and instruction artwork can also be included in an OEM or ODM project brief.

Model comparison

Compare the options on your shortlist

Compare both product configurations side by side, then open either model for its full product information.

Choose a starting group

Both models are selected. Open a model name in the table to view its full specifications.

Product references
Selected specifications
Specification D-001B Slim umbrella bag dispenser D-001B D-001A Wide umbrella bag dispenser D-001A
Product specification
Product dimensions 34 × 25 × 77 cm 47 × 29 × 79 cm
Top layout Single top insertion position Two top insertion positions
Finish shown Silver body / red panel Black body / silver side trim
Product Information
Product range

View Complete Product Information

Choose a product family or search a model to explore its design, dimensions, colours and packing. Each item has its own enquiry button.

D-001B

Slim umbrella bag dispenser

D-001B Slim umbrella bag dispenser
D-001B · Slim umbrella bag dispenser

Slim umbrella bag dispenser

D-001B gives guests an umbrella bagging point in a slim 34 × 25 cm footprint. The top insertion position and upright body place the service at the entrance without requiring a separate umbrella storage rack.

Product information

Product dimensions 34 × 25 × 77 cm
Format Freestanding umbrella bagging station
Top layout Single top insertion position
Finish shown Silver body / red panel
Placement Indoor entrance or reception area

D-001A

Wide umbrella bag dispenser

D-001A Wide umbrella bag dispenser
D-001A · Wide umbrella bag dispenser

Wide umbrella bag dispenser

D-001A uses a wider 47 × 29 cm body with two insertion positions at the top. Its black front and silver side trim suit a more prominent bagging station beside a hotel or office entrance.

Product information

Product dimensions 47 × 29 × 79 cm
Format Freestanding umbrella bagging station
Top layout Two top insertion positions
Finish shown Black body / silver side trim
Placement Indoor entrance or reception area
Buying decisions

Plan the complete bagging service

The device, refill bags and visitor route all affect the usefulness of the station.

Bagging and storage serve different needs

An umbrella bag dispenser helps a visitor take a bagged umbrella further into the building. A locking umbrella stand provides positions for leaving umbrellas behind. Choose the service your entrance needs, or plan both as separate items where the visitor flow calls for them.

Refill compatibility matters as much as body size

The bag opening, length and loading arrangement must work with the chosen dispenser. A generic umbrella sleeve is not automatically a compatible refill. Include the dispenser model and a sample or specification of any existing bag when reviewing replenishment options.

Position the station before the wet route spreads

A visible umbrella bag stand near the entrance gives visitors a chance to use it before reaching reception or interior flooring. Consider the door swing, entry queue and the space needed to hold an umbrella. Keep the station accessible for the staff member who will refill and clean it.

Choosing the entrance setup?

Tell us whether guests will carry or leave their umbrellas.

Use guide

Prepare, guide and replenish

A clear setup makes the station easier for visitors to use and staff to maintain.

Prepare the bag supply

Load the refill bags specified for the chosen dispenser and check that they present correctly at the insertion position. Follow the instructions for the supplied unit. Test the setup with the intended umbrella types before opening the station for guest use.

Provide clear guest guidance

Position concise instructions where users can read them while holding an umbrella. Keep the opening unobstructed and do not force oversized or awkward shapes through it. A staff check during busy periods helps identify empty bags or a feed issue promptly.

Plan the used-bag collection point

Visitors need an obvious place to dispose of used bags when leaving. A separate collection bin can be considered beside the exit route. Keep that collection point and any loose sleeves from obstructing the entrance, and replenish the dispenser as part of the wet-weather routine.

Need help with the refill plan?

Share the selected model and intended umbrella types.

Care and inspection

Keep the station clean and feeding correctly

Inspect the opening and loading area as well as the visible body.

Clean the cabinet and opening

Wipe splash marks from the body and top insertion area, and dry the surface after cleaning. Remove trapped bag fragments without forcing the loading mechanism. Choose a cleaning method suited to the supplied finish so the entrance station remains presentable.

Check the feed and base

Inspect bag presentation, access panels and the base for damage or looseness. If sleeves do not feed correctly, check the refill type and loading arrangement before continuing use. Provide the model and photographs of the bag position when requesting assistance.

Have a loading or feed question?

Include the model and a photograph of the bag arrangement.

Parts and related supplies

Refills and related entrance supplies

Identify the bag specification and any separate items needed around the station.

Refill umbrella bags

Specify D-001A or D-001B when enquiring about refills. Bag length, opening and pack arrangement should be matched to the device. Identify the number of refill packs separately from the dispenser quantity so the initial order and repeat supply are clear.

Instructions and branding

Artwork should explain the actual loading and user process for the selected version. Include language, logo and colour requirements in a custom project brief. Keep the instruction position visible and avoid covering the insertion area or access needed for replenishment.

A coordinated entrance setup

A disposal bin, entrance mat or locking umbrella rack may be useful alongside the bagging station. List these as separate products when discussing the area. Their dimensions and placement should support the visitor route without crowding the doorway.

Match the dispenser and refills

Send the device code and your bag requirements.

Ordering and delivery

Order the device with its refill plan

Keep model, finish, bags and instructions together in the enquiry.

Choose the format and quantity

D-001B is the slim single-position format; D-001A is the wider two-position format. Keep their full codes separate in the order. Include the required quantities and the finish you want to use at each entrance.

Include the refill requirement

Describe the umbrella types and identify any existing sleeve used at the site. Request confirmation of the matched refill specification and the starter quantity. Keep future replenishment requirements visible so the station is practical to maintain after installation.

Review delivery and setup

Include the destination and requested schedule. Packing, supplied bags, instructions and any setup requirements should appear in the quotation. Body dimensions describe the installed unit; carton dimensions and shipping weight are separate details for the final shipment.

OEM and ODM for your entrance range

CLEVO offers OEM and ODM support. Share brand artwork, finish preferences, instruction languages and the proposed device layout. Custom dimensions or insertion arrangements can be reviewed with drawings, bag requirements and sample expectations before project terms are agreed.

Ready to price the order?

Send the selected references, quantities and destination.

CLEVO supply range

Umbrella bagging stations for commercial entrances

Source the selected body format and discuss the refill or branding requirements alongside it.

D-001B Slim umbrella bag dispenser
D-001B · Slim umbrella bag dispenser
For purchasing teams and distributors

Two compact freestanding formats

D-001B and D-001A provide distinct body widths and top arrangements for an entrance service point. Compare the overall dimensions with your furniture and approach space to choose a station that visitors can recognise and use.

D-001B Slim umbrella bag dispenser
D-001B · Slim umbrella bag dispenser
For purchasing teams and distributors

A device and refill combination

The useful purchase is a dispenser with the correct refill arrangement. We can review the selected unit and the required bag supply together so the quotation identifies both. This also establishes a clearer reference for replenishment orders.

D-001A Wide umbrella bag dispenser
D-001A · Wide umbrella bag dispenser
For purchasing teams and distributors

Wholesale and branded project enquiries

Property teams and hospitality distributors can enquire about a standard model mix or an OEM/ODM project. Colour, graphics and packaging can form part of the brief, with the exact configuration and commercial terms established for the order.

Product and order support

Make support requests specific

Use the product reference and the affected detail to explain a replacement, use or order question.

Questions about loading or refills

Send the dispenser code, bag dimensions and a photograph of the loaded position. Describe whether the issue occurs while loading the pack or during guest use. That distinction helps focus the review on compatibility or setup.

Choosing a station for an existing entrance

Provide the available floor space and the intended position relative to the door and reception desk. We can compare the two formats and discuss the refill and instruction requirements with you.

Keep the order documents

Retain the model list, quantities and agreed supply terms. Include the order reference when raising a product or delivery question.

Have a product or order question?

Share the reference and the detail you need help with.

Application planning

Position the service where umbrellas arrive

Consider visitor movement and staff access when planning each location.

Hotel arrivals

A visible bagging point gives arriving guests a defined place to cover a wet umbrella before approaching reception. Coordinate the cabinet finish and instructions with the lobby and keep staff access for refilling.

Office buildings

An umbrella bag dispenser can serve employees and visitors who carry their umbrellas to offices or meeting rooms. Consider the morning arrival period, the available space and the route for collecting used sleeves.

Retail and shared facilities

Place the station where customers can recognise its purpose without blocking the entrance. Refill planning, concise instructions and a used-bag collection point are useful parts of the complete arrangement.

Planning several entrance stations?

List the locations, available space and quantities.

B2B buying questions

Before you order

Answers about product choice, routine use and purchasing details.

Are D-001A and D-001B umbrella storage racks?

They are umbrella bagging devices. Their top insertion positions are used with refill sleeves. For leaving umbrellas in individual locking positions, choose a separate commercial umbrella stand.

What are the dimensions of the two models?

D-001B measures 34 × 25 × 77 cm. D-001A measures 47 × 29 × 79 cm. Allow additional room around either unit for the visitor and the umbrella being handled.

Does D-001A have two insertion positions?

Yes, D-001A has two top insertion positions, while D-001B has one. The suitable umbrella types and refill arrangement should be matched to the supplied version rather than inferred from the number of openings.

Can we use any umbrella bags?

Refills need to match the dispenser’s loading and feed arrangement. Provide a sample or bag specification if you want to use an existing supply. Confirm the compatible refill with the selected unit before ordering it in quantity.

Can we customise the colour or instructions?

Yes. OEM and ODM enquiries can include colours, branding, instruction languages and packaging. A different body or feed arrangement can be reviewed as a design project with its sample and production requirements.

What should be included in a quotation request?

Include the dispenser model, quantity, destination and required refill bags. Add the intended umbrella types, finish and instruction requirements. This gives the quotation a clear device-and-consumable scope.

Ready to specify the bagging point?

Send the model, quantity and refill needs.

Product information · selection · bulk pricing

Request umbrella bag dispensers wholesale pricing

Get a product-based quotation for your business.

Send the D-001A or D-001B quantities, preferred finish and refill requirements. Add the destination, instruction language and any custom branding or design needs.

Tell us what you need to source

  1. Complete model or specification references
  2. Quantities and selected configurations
  3. Application and related supply requirements
  4. Delivery destination and requested schedule